This paper deals with the estimation of forcing functions on a mistuned bladed rotor from measurements of harmonic response via Kalman filter (KF) in time domain. An unique feature of this approach is that the number of estimated variables can be far greater than the number of measurements. The robustness of this method to measurement errors is shown. It is also shown that direct prediction of amplitude and phase of sinusoidal force vector from input/output frequency response function has a large amount of errors in the presence of unavoidable measurement noise. Numerical examples contain both frequency mistuning and geometric mistuning.
Issue Section:
Gas Turbines: Structures and Dynamics
References
1.
Sinha
, A.
, 2009
, “Reduced-Order Model of a Bladed Rotor With Geometric Mistuning
,” ASME J. Turbomach.
, 131
(3
), p. 031007
.2.
Bhartiya
, Y.
, and Sinha
, A.
, 2013
, “Reduced Order Model of a Bladed Rotor With Geometric Mistuning Via Estimated Deviations in Mass and Stiffness Matrices
,” ASME J. Eng. Gas Turbines Power
, 135
(5
), p. 052501
.3.
Vishwakarma
, V.
, Sinha
, A.
, Bhartiya
, Y.
, and Brown
, J. M.
, 2015
, “Modified Modal Domain Analysis of a Bladed Rotor Using Coordinate Measurement Machine Data on Geometric Mistuning
,” ASME J. Eng. Gas Turbines Power
, 137
(4
), p. 042502
4.
Ekici
, K.
, and Hall
, K.
, 2008
, “Nonlinear Frequency Domain Analysis of Unsteady Flows in Turbomachinery With Multiple Excitation Frequencies
,” AIAA J.
, 46
(8
), pp. 1912
–1920
.5.
Schonenborn
, H.
, and Ashcroft
, G.
, 2014
, “Comparison of Non-Linear Linearized CFD Analysis of the Stator-Rotor Interaction of a Compressor Stage,” ASME
Paper No. GT2014-25256.6.
Besem
, F. M.
, Kielb
, R. E.
, and Key
, N. L.
, 2015
, “Forced Response Sensitivity of a Mistuned Rotor From an Embedded Compressor Stage
,” ASME J. Turbomach.
, 138
(3
), p. 031002
.7.
Besem
, F. M.
, Kielb
, R. E.
, Galpin
, P.
, Zori
, L.
, and Key
, N. L.
, 2016
, “Mistuned Forced Response Predictions of an Embedded Rotor in a Multistage Compressor
,” ASME J. Turbomach.
, 138
(6
), p. 061003
.8.
Warren
, C.
, Niezrecki
, C.
, and Avitabile
, P.
, 2010
, “Optical Non-Contacting Vibration Measurement of Rotating Turbine Blades II,” A Conference on Structural Dynamics (IMAC-XXVIII
), Jacksonville, FL, Feb. 1–4, pp. 39
–44
.http://www.am.chalmers.se/~thab/IMAC/2010/PDFs/Papers/s08p004.pdf9.
Vishwakarma
, V.
, and Sinha
, A.
, 2015
, “Estimation of Forcing Function for a Geometrically Mistuned Bladed Rotor Via Modified Modal Domain Analysis
,” ASME J. Eng. Gas Turbines Power
, 138
(4
), p. 042507
.10.
Sinha
, A.
, 2007
, Linear Systems: Optimal and Robust Control
, CRC Press
, Boca Raton, FL
.11.
Kielb
, R. E.
, Feiner
, D. M.
, Griffin
, J. H.
, and Miyakozawa
, 2004
, “Flutter of Mistuned Bladed Disks and Blisks With Aerodynamic and FMM Structural Coupling,” ASME
Paper No. GT2004-54315.12.
Kielb
, R. E.
, 2015
, private communication.13.
Ralston
, A.
, and Rabinowitz
, P.
, 1978
, A First Course in Numerical Analysis
, McGraw-Hill
, New York
.14.
Sinha
, A.
, Hall
, B.
, Cassenti
, B.
, and Hilbert
, G.
, 2008
, “Vibratory Parameters of Blades From Coordinate Measurement Machine Data
,” ASME J. Turbomach.
, 130
(1
), p. 011013
.Copyright © 2018 by ASME
You do not currently have access to this content.
