The implementation of exhaust gas recirculation (EGR) coolers has recently been a widespread methodology for engine in-cylinder NOx reduction. A common problem with the use of EGR coolers is the tendency for a deposit, or fouling layer to form through thermophoresis. These deposit layers consist of soot and volatiles and reduce the effectiveness of heat exchangers at decreasing exhaust gas outlet temperatures, subsequently increasing engine out NOx emission. This paper presents results from a novel visualization rig that allows for the development of a deposit layer while providing optical and infrared access. A 24 h, 379-micron-thick deposit layer was developed and characterized with an optical microscope, an infrared camera, and a thermogravimetric analyzer. The in situ thermal conductivity of the deposit layer was calculated to be 0.047 W/mK. Volatiles from the layer were then evaporated off and the layer reanalyzed. Results suggest that the removal of volatile components affect the thermophysical properties of the deposit. Hypotheses supporting these results are presented.
Effect of Volatiles on Soot Based Deposit Layers
Contributed by the Coal, Biomass and Alternate Fuels Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received February 13, 2014; final manuscript received March 17, 2014; published online May 16, 2014. Editor: David Wisler.
- Views Icon Views
- Share Icon Share
- Search Site
Salvi, A., Hoard, J., Bieniek, M., Abarham, M., Styles, D., and Assanis, D. (May 16, 2014). "Effect of Volatiles on Soot Based Deposit Layers." ASME. J. Eng. Gas Turbines Power. November 2014; 136(11): 111401. https://doi.org/10.1115/1.4027460
Download citation file: