The primary purpose of this study was to show the expected results for cases of single and opposed rows of jets from alternating large and small round holes. Previous publications demonstrated that the NASA empirical model gave results that were an excellent representation of mean experimental scalar results and that the model could confidently be used to investigate configurations for which results have not been published in the open literature. Calculations for cases of opposed rows of jets that would overpenetrate slightly in an inline configuration showed that better mixing was attained when one row was shifted to make a staggered configuration so that a small hole was opposite from a larger one. However, the result was no better than for an optimum inline configuration with all the holes of the same size. Staggering the rows does not make much difference in an optimum inline configuration. For all cases investigated, the dimensionless variance of the mixture fraction decreased significantly with increasing downstream distance, but, at a given downstream location, the variation between cases was small.
Skip Nav Destination
e-mail: jjdholdeman@aol.com
Article navigation
June 2010
Technical Briefs
Spreadsheet Calculations for Jets in Crossflow From Single and Opposed Rows With Alternating Hole Sizes
J. D. Holdeman,
e-mail: jjdholdeman@aol.com
J. D. Holdeman
National Aeronautics and Space Administration, Glenn Research Center
, Cleveland, OH 44135
Search for other works by this author on:
J. R. Clisset,
J. R. Clisset
University of Florida
, Gainesville, FL 32611
Search for other works by this author on:
J. P. Moder
J. P. Moder
Aerospace Engineer
Combustion Branch, Propulsion Systems Division,
National Aeronautics and Space Administration, Glenn Research Center
, Cleveland, OH 44135
Search for other works by this author on:
J. D. Holdeman
National Aeronautics and Space Administration, Glenn Research Center
, Cleveland, OH 44135e-mail: jjdholdeman@aol.com
J. R. Clisset
University of Florida
, Gainesville, FL 32611
J. P. Moder
Aerospace Engineer
Combustion Branch, Propulsion Systems Division,
National Aeronautics and Space Administration, Glenn Research Center
, Cleveland, OH 44135J. Eng. Gas Turbines Power. Jun 2010, 132(6): 064502 (7 pages)
Published Online: March 18, 2010
Article history
Received:
April 9, 2009
Revised:
May 14, 2009
Online:
March 18, 2010
Published:
March 18, 2010
Citation
Holdeman, J. D., Clisset, J. R., and Moder, J. P. (March 18, 2010). "Spreadsheet Calculations for Jets in Crossflow From Single and Opposed Rows With Alternating Hole Sizes." ASME. J. Eng. Gas Turbines Power. June 2010; 132(6): 064502. https://doi.org/10.1115/1.4000129
Download citation file:
Get Email Alerts
Cited By
An Experimental Comparison of Methanol Combustion Strategies: Spark Ignition Versus Compression Ignition
J. Eng. Gas Turbines Power
Systems-Based Approach To Predicting Tbc Delamination Due To Cmas Infiltration
J. Eng. Gas Turbines Power
Related Articles
Increasing the Passive Scalar Mixing Quality of Jets in Crossflow With Fluidics Actuators
J. Eng. Gas Turbines Power (February,2012)
Scalar Mixing Study at High-Schmidt Regime in a Turbulent Jet Flow Using Large-Eddy Simulation/Filtered Density Function Approach
J. Fluids Eng (February,2016)
Optimization of Synthetic Jet Fluidic Structures in Printed Wiring Boards
J. Electron. Packag (December,2006)
Effect of Orifice Geometry on the Development of Slightly Heated Turbulent Jets
J. Fluids Eng (November,2015)
Related Proceedings Papers
Related Chapters
A Computational Assessment of Gas Jets in a Bubbly Co-Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
The Impact of Long-Term Memory in the Iterated Prisoner's Dilemma
Intelligent Engineering Systems through Artificial Neural Networks
Energy Methods
Engineering Practice with Oilfield and Drilling Applications