Three processes for the selective non-catalytic removal (SNCR) of nitric oxides from engine exhaust gases are compared. The three processes are similar but each uses a different chemical agent: ammonia, urea, or cyanuric acid. A number of operating conditions have been studied. In particular, results for the removal of nitric oxide are significantly different for the three processes as the oxygen concentration varies. Ammonia, urea, and cyanuric acid were found to be most effective at low, intermediate, and high oxygen concentrations, respectively. The implications of these results for a range of engines and engine applications are discussed.
Issue Section:
Fuels and Combustion Technology
1.
Sawyer, R. F., 1981, “The Formation and Destruction of Pollutants in Combustion Processes: Clearing the Air on the Role of Combustion Research,” Eighteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 1–22.
2.
Prather, M. J., and Logan, J. A., 1994, “Combustion’s Impact on the Global Atmosphere,” The Twenty-Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 1513–1527.
3.
Bowman, C. T., 1992, “Control of Combustion-Generated Nitrogen Oxide Emissions: Technology Driven by Regulation,” The Twenty-Fourth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 859–878.
4.
Groff
, P. W.
, and Gullett
, B. K.
, 1997
, “Industrial Boiler Retrofit for NOx Control: Combined Selective Noncatalytic Reduction and Selective Catalytic Reduction
,” Environ. Prog.
, 16
(2
), pp. 116
–120
.5.
Chang
, M. B.
, and Cheng
, C. F.
, 1997
, “Plasma-Assisted Removal of NO From Gas Streams via Ammonia Injection
,” Environmental Engineering Science
, 14
(4
), pp. 193
–200
.6.
Miller, J. A., 1996, “Theory and Modeling in Combustion Chemistry,” The Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 461–480.
7.
Lyon, R. K., 1975, “Method for the Reduction of the Concentration of NO in Combustion Effluents Using Ammonia,” U.S. Patent No. 3,900,554.
8.
Lyon
, R. K.
, 1987
, “Thermal DeNox: Controlling Nitrogen Oxides Emissions by a Noncatalytic Process
,” Environ. Sci. Technol.
, 21
(3
), pp. 231
–236
.9.
Miller
, J. A.
, Branch
, M. C.
, and Kee
, R. J.
, 1981
, “A Chemical Kinetic Model for the Selective Reduction of Nitric Oxide by Ammonia
,” Combust. Flame
, 43
, pp. 81
–98
.10.
Caton, J. A., Narney, J. K. III, and Laster, W. R., 1994, “Nitric Oxide Reductions and Nitrous Oxide Emissions Using Ammonia in a Selective Non-Catalytic Process for Exhaust Streams With Up to 15% Oxygen,” Proceedings of the 1994 Central States Section/Combustion Institute Spring Technical Meeting, Madison, WI, June, Paper No. 15, pp. 90–95.
11.
Caton
, J. A.
, Narney
, II, J. K.
, Cariappa
, C.
, and Laster
, W. R.
, 1995
, “The Selective Non-Catalytic Reduction of Nitric Oxide Using Ammonia at up to 15% Oxygen
,” Can. J. Chem. Eng.
, 73
(3
), pp. 345
–350
.12.
Bowman, C. T., 1997, “Mechanisms and Modeling of Gas-Phase Aftertreatment Methods for NO Removal From Combustion Products,” Physical and Chemical Aspects of Combustion, eds., F. L. Dryer and R. F. Sawyer, eds., Gordon and Breach, London, pp. 29–68.
13.
Perry
, R. A.
, and Siebers
, D. L.
, 1986
, “Rapid Reduction of Nitrogen Oxides in Exhaust Gas Streams
,” Nature (London)
, 324
, pp. 657
–658
.14.
Caton
, J. A.
, and Siebers
, D. L.
, 1989
, “Reduction of Nitrogen Oxides in Engine Exhaust Gases by the Addition of Cyanuric Acid
,” ASME J. Eng. Gas Turbines Power
, 111
, pp. 387
–393
.15.
Caton
, J. A.
, and Siebers
, D. L.
, 1989
, “Comparison of Nitric Oxide Removal by Cyanuric Acid and by Ammonia
,” Combust. Sci. Technol.
, 65
, pp. 277
–293
.16.
Caton, J. A., and Siebers, D. L., 1991, “Effects of Hydrogen Addition on the Removal of Nitric Oxide in Exhaust Gases by Cyanuric Acid,” The Twenty-Third (International) Symposium on Combustion, The Combustion Institute, Pittsburgh, PA, pp. 225–230.
17.
Siebers
, D. L.
, and Caton
, J. A.
, 1990
, “Removal of Nitric Oxide From Exhaust Gas With Cyanuric Acid
,” Combust. Flame
, 79
, pp. 31
–46
.18.
Miller
, J. A.
, and Bowman
, C. T.
, 1991
, “Kinetic Modeling of the Reduction of Nitric Oxide in Combustion Products by Isocyanic Acid
,” Int. J. Chem. Kinet.
, 23
, pp. 89
–313
.19.
Cariappa, C., Caton, J. A., and Laster, W. R., 1994, “Modeling the Physical Effects of Selective Non-Catalytic Removal of Nitric Oxide With Cyanuric Acid,” Proceedings of the 1994 Central States Section/Combustion Institute Spring Technical Meeting, Madison, WI, June, Paper No. 16, pp. 96–101.
20.
Cariappa, C., Caton, J. A., and Smith, T. S., 1995, “Modeling the Selective Non-Catalytic Reduction of Nitric Oxide Using Isocyanic Acid,” Proceedings of the 1995 Central States Section/Combustion Institute Spring Technical Meeting, San Antonio, TX, Apr. 24–25, Paper No. 95S-58, pp. 299–304.
21.
Arand, J. K., Muzio, L. J., and Sotter, J. G., 1980, “Urea Reduction of Nitric Oxides in Combustion Effluents,” U.S. Patent No. 4,208,386, June 17.
22.
Jødal, M., Nielsen, C., Hulgaard, T., and Dam-Johansen, K., 1990, “Pilot-Scale Experiments With Ammonia and Urea as Reductants in Selective Non-Catalytic Reduction of Nitric Oxide,” The Twenty-Third Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 237–243.
23.
Alzueta
, M. U.
, Bilbao
, R.
, Millera
, A.
, Oliva
, M.
, and Ibanez
, J. C.
, 2000
, “Impact of New Findings Concerning Urea Thermal Decomposition on the Modeling of the Urea-SNCR Process
,” Energy Fuels
, 14
(2
), pp. 509
–510
.24.
Muzio, L. J., Martz, T. D., Montgomery, T. A., Quartucy, G. C., Cole, J. A., and Kramlich, J. C., 1990, “N2O Formation in Selective Non-Catalytic Nitric Oxides Reduction Process,” Fall International Symposium of the American Flame Research Committee, San Francisco, Nov., Paper No. 39.
25.
Glarborg
, P.
, Kristensen
, P. G.
, Jensen
, S. H.
, and Dam-Johansen
, K.
, 1994
, “A Flow Reactor Study of HNCO Oxidation Chemistry
,” Combust. Flame
, 98
, pp. 241
–258
.26.
Alzueta
, M. U.
, Bilbao
, R.
, Millera
, A.
, Oliva
, M.
, and Ibanez
, J. C.
, 1998
, “Interactions Between Nitric Oxide and Urea Under Flow Reactor Conditions
,” Energy Fuels
, 12
, pp. 1001
–1007
.27.
Brouwer, J., Heap, M. P., Pershing, D. W., and Smith, P. J., 1996, “A Model for Prediction of Selective Non-Catalytic Reduction of Nitrogen Oxides by Ammonia, Urea, and Cyanuric Acid With Mixing Limitations in the Presence of CO,” The Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, pp. 2117–2124.
28.
Kasuya
, F.
, Glarborg
, P.
, Johnsson
, J. E.
, and Dam-Johansen
, K.
, 1995
, “The Thermal DeNox Process: Influence of Partial Pressures and Temperature
,” Chem. Eng. Sci.
, 50
(9
), pp. 1455
–1466
.29.
Srivatsa, S., 1997, “The Selective Non-Catalytic Reduction of Nitric Oxides Using Urea as the Chemical Agent: An Experimental Approach,” M.S. thesis, Department of Mechanical Engineering, Texas A&M University, Dec.
30.
Srivatsa, S., and Caton, J. A., 1998, “Selective Non-Catalytic Reduction of Nitric Oxides by Urea: Effects of Oxygen and Carbon Monoxide,” Proceedings of the 1998 Central States Section/Combustion Institute Spring Technical Meeting, Paper No. 98-53, pp. 273–278, Lexington, KY, May 31–June 2, Paper No. 98-53; pp. 273–278.
31.
Chao, G. T., 1977, “Urea: Its Properties and Manufacture,” Chao’s Institute, West Covina, CA.
32.
Heap
, M. P.
, Chen
, S. L.
, Kramlich
, J. C.
, McCarthy
, J. M.
, and Pershing
, D. W.
, 1988
, “An Advanced Selective Reduction Process for NOx Control
,” Nature (London)
, 335
, pp. 620
–622
.33.
Smith, T. S., and Caton, J. A., 1995, “Reductions and Conversions of Nitrogen Compounds Using Ammonia in a Selective Non-Catalytic Process for Exhaust Streams at Pressures up to 515 kPa,” Proceedings of the 1995 Central States Section/Combustion Institute Spring Technical Meeting, San Antonio, TX, Apr. Paper No. 95S-015, pp. 69–74; 24–25.
34.
Smith, T. S., and Caton, J. A., 1995, “Nitric Oxide Reductions and Nitrous Oxide Emissions Using Isocyanic Acid in a Selective Non-Catalytic Process for Exhaust Streams at Pressures up to 515 kPa,” Proceedings of the 1995 Central States Section/Combustion Institute Spring Technical Meeting, San Antonio, TX, Apr. 24–25, Paper No. 95S-016, pp. 75–80.
35.
Miller, J. A., and Glarborg, P., 1996, “Modeling the Formation of N2O and NO2 in the Thermal De-Nox Process,” Gas Phase Chemical Reaction Systems: Experiments and Models 100 Years After Max Bodenstein, J. Wlfrum, H.-R. Volpp, R. Rannacher, and J. Warnatz, eds., special issue of Springer Series in Chemical Physics, 61, Springer-Verlag, Berlin, pp. 318–333.
Copyright © 2004
by ASME
You do not currently have access to this content.