The deformation behavior of thermally sprayed partially stabilized zirconia (PSZ) coatings are investigated using Hertzian indentation and four-point bend testing, with in situ acoustic emission monitoring. The experimental deformation curves, together with the corresponding acoustic emission responses and the fracture properties of the material are used in defining the deformation characteristics of the coating (ceramic overlay with metallic bond coat where applicable) and substrate composite system. Experiments are aimed in examining the influence of the bond coat and the coating properties on the form of deformation. Substrate temperature and pauses during spraying are demonstrated to strongly effect the coating properties and the resulting fracture/failure characteristics of the composite system. [S0742-4795(00)02503-5]
Deformation of Plasma Sprayed Thermal Barrier Coatings
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, June 7–10, 1999; ASME Paper 99-GT-348. Manuscript received by IGTI March 9, 1999; final revision received by the ASME Headquarters May 15, 2000. Associate Technical Editor: D. Wisler.
- Views Icon Views
- Share Icon Share
- Search Site
Senturk , U., Lima, R. S., Lima, C. R. C., and Berndt, C. C. (May 15, 2000). "Deformation of Plasma Sprayed Thermal Barrier Coatings ." ASME. J. Eng. Gas Turbines Power. July 2000; 122(3): 387–392. https://doi.org/10.1115/1.1287493
Download citation file: