A team approach involving a turbine engine company (Rolls-Royce), its single-crystal casting facilities, and a superalloy developer and ingot manufacturer (Cannon-Muskegon), utilizing the concepts of simultaneous engineering, has been used to develop CMSX-4 alloy successfully for turbine blade applications. CMSX-4 alloy is a second-generation nickel-base single-crystal superalloy containing 3 percent (wt) rhenium (Re) and 70 percent volume fraction of the coherent γ′ precipitate strengthening phase. Its finely balanced composition offers an attractive range of properties for turbine airfoil applications. In particular the alloy’s combination of high strength in relation to creep-rupture, mechanical and thermal fatigue, good phase stability following extensive high temperature, stressed exposure and oxidation, hot corrosion and coating performance, are attractive for turbine engine applications where engine performance and turbine airfoil durability are of prime importance. The paper details the single-crystal casting process and heat treatment manufacturing development for turbine blades in CMSX-4 alloy. Competitive single-crystal casting yields are being achieved in production and extensive vacuum heat treatment experience confirms CMSX-4 alloy to have a practical production solution heat treat/homogenization “window.” The creep-rupture data-base on CMSX-4 alloy now includes 325 data points from 17 heats including 3630 kg (8000 lb) production size heats. An appreciable portion of this data was machined-from-blade (MFB) properties, which indicate turbine blade component capabilities based on single-crystal casting process, component configuration, and heat treatment. The use of hot isostatic pressing (HIP) has been shown to eliminate single-crystal casting micropores, which along with the essential absence of γ/γ′ eutectic phase, carbides, stable oxide, nitride and sulfide inclusions, results in remarkably high mechanical fatigue properties, with smooth and particularly notched specimens. The Re addition has been shown not only to benefit creep and mechanical fatigue strength (with and without HIP), but also bare oxidation, hot corrosion (sulfidation), and coating performance. The high level of balanced properties determined by extensive laboratory evaluation has been confirmed during engine testing of the Rolls-Royce Pegasus turbofan.
Skip Nav Destination
Article navigation
April 1996
Research Papers
Aero Engine Test Experience With CMSX-4® Alloy Single-Crystal Turbine Blades
K. P. L. Fullagar,
K. P. L. Fullagar
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
Search for other works by this author on:
R. W. Broomfield,
R. W. Broomfield
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
Search for other works by this author on:
M. Hulands,
M. Hulands
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
Search for other works by this author on:
K. Harris,
K. Harris
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
Search for other works by this author on:
G. L. Erickson,
G. L. Erickson
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
Search for other works by this author on:
S. L. Sikkenga
S. L. Sikkenga
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
Search for other works by this author on:
K. P. L. Fullagar
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
R. W. Broomfield
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
M. Hulands
Aerospace Group, Rolls-Royce plc, Derby, United Kingdom
K. Harris
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
G. L. Erickson
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
S. L. Sikkenga
SPS Technologies, Cannon-Muskegon Corp. Muskegon, MI 49443
J. Eng. Gas Turbines Power. Apr 1996, 118(2): 380-388 (9 pages)
Published Online: April 1, 1996
Article history
Received:
February 8, 1994
Online:
November 19, 2007
Citation
Fullagar, K. P. L., Broomfield, R. W., Hulands, M., Harris, K., Erickson, G. L., and Sikkenga, S. L. (April 1, 1996). "Aero Engine Test Experience With CMSX-4® Alloy Single-Crystal Turbine Blades." ASME. J. Eng. Gas Turbines Power. April 1996; 118(2): 380–388. https://doi.org/10.1115/1.2816600
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Improved Performance Rhenium Containing Single Crystal Alloy Turbine Blades Utilizing PPM Levels of the Highly Reactive Elements Lanthanum and Yttrium
J. Eng. Gas Turbines Power (January,1999)
Development and Turbine Engine Performance of Three Advanced Rhenium Containing Superalloys for Single Crystal and Directionally Solidified Blades and Vanes
J. Eng. Gas Turbines Power (July,1998)
Thermomechanical Fatigue Behavior of Bare and Coated CMSX-4
J. Eng. Gas Turbines Power (January,2010)
Fatigue Life Prediction Modeling for Turbine Hot Section Materials
J. Eng. Gas Turbines Power (April,1989)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
The Oxidation of Niobium in the β Phase and Its Impact on the Corrosion of Zr-Nb Alloys under Reactor Conditions
Zirconium in the Nuclear Industry: 20th International Symposium
E110opt Fuel Cladding Corrosion under PWR Conditions
Zirconium in the Nuclear Industry: 20th International Symposium