Skip Nav Destination
Issues
January 1957
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
The Spring Back of Metals
Trans. ASME. January 1957, 79(1): 1–7.
doi: https://doi.org/10.1115/1.4012908
Topics:
Metals
,
Springs
,
Alloys
,
Aluminum
,
Brass (Metal)
,
Bronze
,
Elastic moduli
,
Mathematical analysis
,
Nickel
,
Shapes
Design Study of a Hydrostatic Gas Bearing With Inherent Orifice Compensation
Trans. ASME. January 1957, 79(1): 11–21.
doi: https://doi.org/10.1115/1.4012913
Topics:
Design
,
Gas bearings
,
Hydrostatics
,
Bearings
,
Friction
,
Stress
,
Torque
,
Dynamometers
,
Flow (Dynamics)
,
Journal bearings
Specific Heats of Liquid Metals and Liquid Salts
Trans. ASME. January 1957, 79(1): 23–28.
doi: https://doi.org/10.1115/1.4012914
Topics:
Liquid metals
,
Errors
,
Heat transfer
,
High temperature
Fuel Elements for Nuclear Reactors
Trans. ASME. January 1957, 79(1): 29–33.
doi: https://doi.org/10.1115/1.4012915
Topics:
Fuels
,
Nuclear reactors
,
Heat transfer
,
Design
Reactor Shielding
Trans. ASME. January 1957, 79(1): 35–39.
doi: https://doi.org/10.1115/1.4012916
Topics:
Gamma rays
,
Heat shielding
,
Neutrons
,
Radiation sources
Safeguard Features of a Fast-Breeder-Reactor Power Plant
Trans. ASME. January 1957, 79(1): 41–46.
doi: https://doi.org/10.1115/1.4012917
Topics:
Power stations
,
Design
,
Safety
Methods of Refueling Heterogeneous Nuclear Reactors
Trans. ASME. January 1957, 79(1): 47–53.
doi: https://doi.org/10.1115/1.4012918
Topics:
Nuclear reactors
Design of Corrugated Diaphragms
Trans. ASME. January 1957, 79(1): 55–61.
doi: https://doi.org/10.1115/1.4012919
Topics:
Design
,
Diaphragms (Mechanical devices)
,
Diaphragms (Structural)
,
Stress
,
Deflection
,
Dimensions
,
Sheet materials
,
Stiffness
Investigations of the Properties of Corrugated Diaphragms
Trans. ASME. January 1957, 79(1): 65–81.
doi: https://doi.org/10.1115/1.4012923
Recent Research on Flat Diaphragms and Circular Plates With Particular Reference to Instrument Applications
Trans. ASME. January 1957, 79(1): 83–87.
doi: https://doi.org/10.1115/1.4012927
Effect of Surface Finish on the Fatigue Strength of Titanium Alloys RC 130B and Ti 140A
Trans. ASME. January 1957, 79(1): 89–95.
doi: https://doi.org/10.1115/1.4012930
Topics:
Fatigue strength
,
Finishes
,
Titanium alloys
,
Surface roughness
,
Metals
,
Approximation
,
Cold rolling
,
Cycles
,
Fatigue
,
Fatigue limit
Certain Departures From Plastic Ideality at Small Strains
Trans. ASME. January 1957, 79(1): 97–110.
doi: https://doi.org/10.1115/1.4012933
Topics:
Copper
,
Creep
,
Deformation
,
Stress
,
Temperature
On the Applicability of Notch Tensile Test Data to Strength Criteria in Engineering Design
Trans. ASME. January 1957, 79(1): 111–115.
doi: https://doi.org/10.1115/1.4012934
Topics:
Design
,
Engineering design
,
Manufacturing
Creep Damage in a Cr-Mo-V Steel as Measured by Retained Stress Rupture Properties
Trans. ASME. January 1957, 79(1): 117–125.
doi: https://doi.org/10.1115/1.4012937
Topics:
Creep
,
Damage
,
Rupture
,
Steel
,
Stress
,
Fracture (Materials)
,
Fracture (Process)
,
Metals
,
Ductility
,
Exhaust systems
Some Studies of Angle Relationships in Metal Cutting
Trans. ASME. January 1957, 79(1): 127–137.
doi: https://doi.org/10.1115/1.4012941
Topics:
Metal cutting
,
Cutting
,
Friction
,
Shear (Mechanics)
,
Die cutting
,
Fluids
,
Metals
,
Shear stress
,
Shearing (Deformation)
,
Steel
On the Drilling of Metals: 2—The Torque and Thrust in Drilling
Trans. ASME. January 1957, 79(1): 139–147.
doi: https://doi.org/10.1115/1.4012944
Topics:
Drilling
,
Metals
,
Thrust
,
Torque
,
Drills (Tools)
,
Cutting
,
Dynamometers
,
Machining
Influence of Grinding Fluids Upon Residual Stresses in Hardened Steel
Trans. ASME. January 1957, 79(1): 149–152.
doi: https://doi.org/10.1115/1.4012947
Topics:
Fluids
,
Grinding
,
Martensitic steel
,
Residual stresses
,
Stress
,
Ball bearings
,
Heat
,
Steel
,
Wheels
Residual Stresses in Cold Extruded Aluminum
Trans. ASME. January 1957, 79(1): 155–158.
doi: https://doi.org/10.1115/1.4012950
Topics:
Aluminum
,
Residual stresses
,
Extruding
,
Stress
,
Compressive stress
,
Temperature
,
Work hardening
Plant Management and Other Factors Affecting Maintenance Costs in Steam-Generating Stations
Trans. ASME. January 1957, 79(1): 161–171.
doi: https://doi.org/10.1115/1.4012954
Topics:
Maintenance
,
Steam
,
Design
,
Fuels
,
Plant layout
,
Public utilities
,
Thermal energy
,
Thermal power stations
Maintenance Factors Affecting Production Costs
Trans. ASME. January 1957, 79(1): 173–182.
doi: https://doi.org/10.1115/1.4012959
Topics:
Maintenance
,
Design
Fluid Flow Through Two Orifices in Series: III—The Parameters of Metastable and Stable Flow of Hot Water
Trans. ASME. January 1957, 79(1): 183–189.
doi: https://doi.org/10.1115/1.4012960
Topics:
Flow (Dynamics)
,
Fluid dynamics
,
Hot water
,
Orifices
,
Pressure
,
Fluids
,
Nozzles
,
Steam
,
Condensed matter
,
Drops
Discussions and Closures
Discussion: “The Spring Back of Metals” (Gardiner, F. J., 1957, Trans. ASME, 79, pp. 1–7)
Trans. ASME. January 1957, 79(1): 7.
doi: https://doi.org/10.1115/1.4012909
Discussion: “The Spring Back of Metals” (Gardiner, F. J., 1957, Trans. ASME, 79, pp. 1–7)
Trans. ASME. January 1957, 79(1): 7–8.
doi: https://doi.org/10.1115/1.4012910
Discussion: “The Spring Back of Metals” (Gardiner, F. J., 1957, Trans. ASME, 79, pp. 1–7)
Trans. ASME. January 1957, 79(1): 8.
doi: https://doi.org/10.1115/1.4012911
Closure to “Discussions of ‘The Spring Back of Metals’” (1957, Trans. ASME, 79, pp. 7–8)
Trans. ASME. January 1957, 79(1): 8–9.
doi: https://doi.org/10.1115/1.4012912
Topics:
Springs
Discussion: “Design of Corrugated Diaphragms” (Haringx, J. A., 1957, Trans. ASME, 79, pp. 55–61)
Trans. ASME. January 1957, 79(1): 61–62.
doi: https://doi.org/10.1115/1.4012920
Discussion: “Design of Corrugated Diaphragms” (Haringx, J. A., 1957, Trans. ASME, 79, pp. 55–61)
Trans. ASME. January 1957, 79(1): 62.
doi: https://doi.org/10.1115/1.4012921
Closure to “Discussions of ‘Design of Corrugated Diaphragms’” (1957, Trans. ASME, 79, pp. 61–62)
Trans. ASME. January 1957, 79(1): 62–64.
doi: https://doi.org/10.1115/1.4012922
Topics:
Design
Discussion: “Effect of Surface Finish on the Fatigue Strength of Titanium Alloys RC 130B and Ti 140A” (Sinclair, G. M., Corten, H. T., and Dolan, T. J., 1957, Trans. ASME, 79, pp. 89–95)
Trans. ASME. January 1957, 79(1): 95–96.
doi: https://doi.org/10.1115/1.4012931
Topics:
Fatigue strength
,
Finishes
,
Titanium alloys
Closure to “Discussion of ‘Effect of Surface Finish on the Fatigue Strength of Titanium Alloys RC 130B and Ti 140A’” (1957, Trans. ASME, 79, pp. 95–96)
Trans. ASME. January 1957, 79(1): 96.
doi: https://doi.org/10.1115/1.4012932
Topics:
Fatigue strength
,
Finishes
,
Titanium alloys
Closure to “Discussions of ‘Creep Damage in a Cr-Mo-V Steel as Measured by Retained Stress Rupture Properties’” (1957, Trans. ASME, 79, p. 125)
Trans. ASME. January 1957, 79(1): 125–126.
doi: https://doi.org/10.1115/1.4012940
Discussion: “Some Studies of Angle Relationships in Metal Cutting” (Creveling, J. H., Jordan, T. F., and Thomsen, E. G., 1957, Trans. ASME, 79, pp. 127–137)
Trans. ASME. January 1957, 79(1): 137–138.
doi: https://doi.org/10.1115/1.4012942
Topics:
Metal cutting
Closure to “Discussion of ‘Some Studies of Angle Relationships in Metal Cutting’” (1957, Trans. ASME, 79, pp. 137–138)
Trans. ASME. January 1957, 79(1): 138.
doi: https://doi.org/10.1115/1.4012943
Topics:
Metals
Discussion: “On the Drilling of Metals: 2—The Torque and Thrust in Drilling” (Shaw, M. C., and Oxford, Jr., C. J., 1957, Trans. ASME, 79, pp. 139–147)
Trans. ASME. January 1957, 79(1): 147–148.
doi: https://doi.org/10.1115/1.4012945
Closure to “Discussion of ‘On the Drilling of Metals: 2—The Torque and Thrust in Drilling’” (1957, Trans. ASME, 79, pp. 147–148)
Trans. ASME. January 1957, 79(1): 148.
doi: https://doi.org/10.1115/1.4012946
Discussion: “Influence of Grinding Fluids Upon Residual Stresses in Hardened Steel” (Letner, H. R., 1957, Trans. ASME, 79, pp. 149–152)
Trans. ASME. January 1957, 79(1): 152–153.
doi: https://doi.org/10.1115/1.4012948
Topics:
Fluids
,
Grinding
,
Martensitic steel
,
Residual stresses
Closure to “Discussion of ‘Influence of Grinding Fluids Upon Residual Stresses in Hardened Steel’” (1957, Trans. ASME, 79, pp. 152–153)
Trans. ASME. January 1957, 79(1): 153.
doi: https://doi.org/10.1115/1.4012949
Topics:
Fluids
,
Grinding
,
Residual stresses
Discussion: “Residual Stresses in Cold Extruded Aluminum” (Frisch, J., and Thomsen, E. G., 1957, Trans. ASME, 79, pp. 155–158)
Trans. ASME. January 1957, 79(1): 159.
doi: https://doi.org/10.1115/1.4012951
Topics:
Aluminum
,
Residual stresses
Discussion: “Residual Stresses in Cold Extruded Aluminum” (Frisch, J., and Thomsen, E. G., 1957, Trans. ASME, 79, pp. 155–158)
Trans. ASME. January 1957, 79(1): 159–160.
doi: https://doi.org/10.1115/1.4012952
Topics:
Aluminum
,
Residual stresses
Closure to “Discussions of ‘Residual Stresses in Cold Extruded Aluminum’” (1957, Trans. ASME, 79, pp. 159–160)
Trans. ASME. January 1957, 79(1): 160.
doi: https://doi.org/10.1115/1.4012953
Topics:
Residual stresses
Discussion: “Plant Management and Other Factors Affecting Maintenance Costs in Steam-Generating Stations” (Estcourt, V. F., 1957, Trans. ASME, 79, pp. 161–171)
Trans. ASME. January 1957, 79(1): 171.
doi: https://doi.org/10.1115/1.4012955
Topics:
Maintenance
,
Steam
Discussion: “Plant Management and Other Factors Affecting Maintenance Costs in Steam-Generating Stations” (Estcourt, V. F., 1957, Trans. ASME, 79, pp. 161–171)
Trans. ASME. January 1957, 79(1): 171.
doi: https://doi.org/10.1115/1.4012956
Topics:
Maintenance
,
Steam
Discussion: “Plant Management and Other Factors Affecting Maintenance Costs in Steam-Generating Stations” (Estcourt, V. F., 1957, Trans. ASME, 79, pp. 161–171)
Trans. ASME. January 1957, 79(1): 171–172.
doi: https://doi.org/10.1115/1.4012957
Topics:
Maintenance
,
Steam
Closure to “Discussions of ‘Plant Management and Other Factors Affecting Maintenance Costs in Steam-Generating Stations’” (1957, Trans. ASME, 79, pp. 171–172)
Trans. ASME. January 1957, 79(1): 172.
doi: https://doi.org/10.1115/1.4012958
Topics:
Maintenance
,
Steam
Discussion: “Fluid Flow Through Two Orifices in Series: III—The Parameters of Metastable and Stable Flow of Hot Water” (Kinderman, W. J., and Wales, E. W., 1957, Trans. ASME, 79, pp. 183–189)
Trans. ASME. January 1957, 79(1): 189.
doi: https://doi.org/10.1115/1.4012961
Topics:
Flow (Dynamics)
,
Fluid dynamics
,
Hot water
,
Orifices
Closure to “Discussion of ‘Fluid Flow Through Two Orifices in Series: III—The Parameters of Metastable and Stable Flow of Hot Water’” (1957, Trans. ASME, 79, p. 189)
Trans. ASME. January 1957, 79(1): 189–190.
doi: https://doi.org/10.1115/1.4012962
Topics:
Flow (Dynamics)
,
Fluid dynamics
,
Orifices
Email alerts
RSS Feeds
Characterization of Two-Phase Wakes in an Upward Adiabatic Liquid-Gas Flow Around a Cylinder
J. Fluids Eng (August 2023)
Experimental Study of Turbulent Wake Flow Around Trapezoidal Cylinders With Varying Streamwise Aspect Ratios
J. Fluids Eng (August 2023)
Unsteady Simulation and Analysis of Energy Loss Mechanism of a Vertical Volute Pump Under Stall Conditions
J. Fluids Eng (August 2023)
