This study describes the dynamic behaviors of droplet formation in microfluidic cross-junction devices (MFCDs) based on a two-dimensional numerical model using the volume of fluid (VOF) method. The effects of the junction angle (ϕ = 30 to 90 deg) between the main and side channels and the viscosity ratios (β = 10−5 to 2.0) are considered. The numerical results indicate that the active area for droplet formation in the alternating digitized pattern formation (ADPF) generally increases with the decrease of ϕ at the same water fraction (wf). A junction angle of around 60 deg was predicted as the most efficient angle at which alternating droplets are still formed at lower capillary numbers (Ca). In addition, the droplet size in ADPF decreases as ϕ increases with the same flow conditions. When ϕ is less than 90 deg and prior to approaching the equilibrium state, there always exists a periodic deviation in the relative distance between droplets. The frequency of droplet generation in ADPF decreases as ϕ decreases, and it decreases more quickly when ϕ is less than 60 deg. In addition, the throughput of MFCDs can be controlled effectively as a function of ϕ, wf, and Ca. The droplet formation in MFCDs depends significantly on the viscosity ratio β, and the ADPF becomes a jetting formation (JF) when β is greater than unity. Furthermore, the droplet size in ADPF decreases with the increase of β. The understanding of droplet formation in MFCDs is very useful for many applications, such as nanoparticle synthesis with different concentrations, hydrogel bead generation, or cell transplantation in biomedical therapy.
Effects of Junction Angle and Viscosity Ratio on Droplet Formation in Microfluidic Cross-Junction
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received June 16, 2015; final manuscript received October 2, 2015; published online January 6, 2016. Assoc. Editor: Shizhi Qian.
- Views Icon Views
- Share Icon Share
- Search Site
Ngo, I., Woo Joo, S., and Byon, C. (January 6, 2016). "Effects of Junction Angle and Viscosity Ratio on Droplet Formation in Microfluidic Cross-Junction." ASME. J. Fluids Eng. May 2016; 138(5): 051202. https://doi.org/10.1115/1.4031881
Download citation file: