Computational modeling of fluidized beds can be used to predict the operation of biomass gasifiers after extensive validation with experimental data. The present work focused on validating computational simulations of a fluidized bed using a multifluid Eulerian–Eulerian model to represent the gas and solid phases as interpenetrating continua. Simulations of a cold-flow glass bead fluidized bed, using two different drag models, were compared with experimental results for model validation. The validated numerical model was then used to complete a parametric study for the coefficient of restitution and particle sphericity, which are unknown properties of biomass. Biomass is not well characterized, and so this study attempts to demonstrate how particle properties affect the hydrodynamics of a fluidized bed. Hydrodynamic results from the simulations were compared with X-ray flow visualization computed tomography studies of a similar bed. It was found that the Gidaspow (blending) model can accurately predict the hydrodynamics of a biomass fluidized bed. The coefficient of restitution of biomass did not affect the hydrodynamics of the bed for the conditions of this study; however, the bed hydrodynamics were more sensitive to particle sphericity variation.
CFD Modeling and X-Ray Imaging of Biomass in a Fluidized Bed
- Views Icon Views
- Share Icon Share
- Search Site
Deza, M., Franka, N. P., Heindel, T. J., and Battaglia, F. (October 29, 2009). "CFD Modeling and X-Ray Imaging of Biomass in a Fluidized Bed." ASME. J. Fluids Eng. November 2009; 131(11): 111303. https://doi.org/10.1115/1.4000257
Download citation file: