This study discusses formation damage mechanisms that were caused by commonly used chemical treatments. The chemicals used in these treatments included a scale inhibitor, a biocide-corrosion inhibitor, an in situ gelled acid, a full-strength mud acid, and a mutual solvent. These treatments were designed to remove a known form of formation damage. However, they created new forms of formation damage, which resulted in a significant decline in the performance of the treated wells. Case histories that illustrate the initial and new formation damage mechanisms are explained in detail. Laboratory and field studies that were performed to identify these mechanisms are discussed. Moreover, this paper highlights the remedial actions and field application that resulted in restoring the performance of various wells without affecting the integrity of the formation (both carbonate and sandstone). Finally, recommendations are given to minimize formation damage due to various chemical treatments.
Skip Nav Destination
Article navigation
September 2005
Research Papers
Formation Damage Induced by Chemical Treatments: Case Histories
Hisham A. Nasr-El-Din
Hisham A. Nasr-El-Din
Saudi Aramco R&D
, PO Box 62, Dhahran 31311, Saudi Arabia
Search for other works by this author on:
Hisham A. Nasr-El-Din
Saudi Aramco R&D
, PO Box 62, Dhahran 31311, Saudi ArabiaJ. Energy Resour. Technol. Sep 2005, 127(3): 214-224 (11 pages)
Published Online: March 17, 2005
Article history
Received:
September 3, 2004
Revised:
March 17, 2005
Citation
Nasr-El-Din, H. A. (March 17, 2005). "Formation Damage Induced by Chemical Treatments: Case Histories." ASME. J. Energy Resour. Technol. September 2005; 127(3): 214–224. https://doi.org/10.1115/1.1924464
Download citation file:
Get Email Alerts
Fuel Consumption Prediction in Dual-Fuel Low-Speed Marine Engines With Low-Pressure Gas Injection
J. Energy Resour. Technol (December 2024)
A Semi-Analytical Rate-Transient Analysis Model for Fractured Horizontal Well in Tight Reservoirs Under Multiphase Flow Conditions
J. Energy Resour. Technol (November 2024)
Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine
J. Energy Resour. Technol (December 2024)
Downdraft Gasification for Biogas Production: The Role of Artificial Intelligence
J. Energy Resour. Technol (December 2024)
Related Articles
Closure to “Discussion of ‘The Impact of the Model of the Environment in Exergy Analyses,’ ” (2000, ASME J. Energy Resour. Technol., 122 , No. 4, p. 248)
J. Energy Resour. Technol (December,2000)
Discussion: “The Impact of the Model of the Environment in Exergy Analyses” (Mun˜oz, J. R., and Michaelides, E. E., 1999, ASME J. Energy Resour. Technol., 121 , pp. 268–276)
J. Energy Resour. Technol (December,2000)
Effect of Pipe Eccentricity on Surge Pressures
J. Energy Resour. Technol (September,1991)
Use of Superheated Steam in Oil-Well Drilling
Trans. ASME (January,1931)
Related Proceedings Papers
Related Chapters
Introduction
History of Line Pipe Manufacturing in North America
Historical Perspective of Oil Well Drilling
Oilwell Drilling Engineering
Introduction
Corrosion and Materials in Hydrocarbon Production: A Compendium of Operational and Engineering Aspects