An empirical study of pool nucleate boiling enhanced with a microporous coating was conducted within the context of microprocessor cooling. A thermal test vehicle (TTV) emulated the heat load from a general purpose microprocessor and delivered a moderately nonuniform heat flux density distribution at the boiling surface that would be typical of mainstream microprocessors. The TTV was affixed to a copper test coupon that formed the bottom surface of a sealed boiling chamber containing FC-72 at atmospheric pressure. A design of experiments was conducted on multiple test coupons to identify how the microporous coating, the base thickness of the coupon, and the height of small pin fins affect the combined conduction and boiling heat transfer from the test coupon. The data revealed that the presence of the microporous coating was the most significant factor of the three tested and indicates that the presence of fins as short as may play a role in reducing hysteresis in the boiling curve.
Skip Nav Destination
e-mail: you@uta.edu
Article navigation
March 2008
Research Papers
Investigation of Microporous Coatings and Mesoscale Evaporator Enhancements for Two-Phase Cooling of Electronic Components
S. M. You
S. M. You
Department of Mechanical and Aerospace Engineering,
e-mail: you@uta.edu
The University of Texas at Arlington
, Arlington, TX 76019-0023
Search for other works by this author on:
Mark A. Trautman
Murli Tirumala
S. M. You
Department of Mechanical and Aerospace Engineering,
The University of Texas at Arlington
, Arlington, TX 76019-0023e-mail: you@uta.edu
J. Electron. Packag. Mar 2008, 130(1): 011007 (6 pages)
Published Online: February 4, 2008
Article history
Received:
January 4, 2006
Revised:
August 31, 2007
Published:
February 4, 2008
Citation
Trautman, M. A., Tirumala, M., and You, S. M. (February 4, 2008). "Investigation of Microporous Coatings and Mesoscale Evaporator Enhancements for Two-Phase Cooling of Electronic Components." ASME. J. Electron. Packag. March 2008; 130(1): 011007. https://doi.org/10.1115/1.2837509
Download citation file:
Get Email Alerts
Cited By
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Models of Steady Heat Conduction in Multiple Cylindrical Domains
J. Electron. Packag (March,2006)
Nucleate Boiling Comparison between Teflon-Coated Plain Copper and Cu-HTCMC in Water
J. Heat Transfer (August,2018)
Numerical Simulation of Evaporating Two-Phase Flow in a High-Aspect-Ratio Microchannel with Bends
J. Heat Transfer (August,2017)
High Temperature Radiation Heat Transfer Performance of Thermal Barrier Coatings With Multiple Layered Structures
J. Eng. Gas Turbines Power (January,2009)
Related Proceedings Papers
Related Chapters
Chitosan-Based Drug Delivery Systems
Chitosan and Its Derivatives as Promising Drug Delivery Carriers
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment, Second Edition