A novel heat sink based on a multilayer stack of liquid cooled microchannels is investigated. For a given pumping power and heat removal capability for the heat sink, the flow rate across a stack of microchannels is lower compared to a single layer of microchannels. Numerical simulations using a computationally efficient multigrid method [1] were carried out to investigate the detailed conjugate transport within the heat sink. The effects of the microchannel aspect ratio and total number of layers on thermal performance were studied for water as coolant. A heat sink of base area 10 mm by 10 mm with a height in the range 1.8 to 4.5 mm (2–5 layers) was considered with water flow rate in the range (50 ml/min) to (400 ml/min). The results of the computational simulations were also compared with a simplified thermal resistance network analysis.
Skip Nav Destination
e-mail: yogendra.joshi@me.gatech.edu
Article navigation
March 2004
Technical Papers
Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronic Components
Xiaojin Wei,
Xiaojin Wei
G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332
Search for other works by this author on:
Yogendra Joshi
e-mail: yogendra.joshi@me.gatech.edu
Yogendra Joshi
G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332
Search for other works by this author on:
Xiaojin Wei
G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332
Yogendra Joshi
G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332
e-mail: yogendra.joshi@me.gatech.edu
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received June 2003. Associate Editor: D. Agonafer.
J. Electron. Packag. Mar 2004, 126(1): 60-66 (7 pages)
Published Online: April 30, 2004
Article history
Received:
June 1, 2003
Online:
April 30, 2004
Citation
Wei , X., and Joshi, Y. (April 30, 2004). "Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronic Components ." ASME. J. Electron. Packag. March 2004; 126(1): 60–66. https://doi.org/10.1115/1.1647124
Download citation file:
Get Email Alerts
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag
Extreme Drop Durability of Sintered Silver Traces Printed With Extrusion and Aerosol Jet Processes
J. Electron. Packag (December 2024)
Related Articles
Experimental Investigation of an Ultrathin Manifold Microchannel Heat Sink for Liquid-Cooled Chips
J. Heat Transfer (August,2010)
Fluid Flow and Thermal Characteristics of a Microchannel Heat Sink Subject to an Impinging Air Jet
J. Heat Transfer (July,2005)
Optimization of Pin-Fin Heat Sinks for Impingement Cooling of Electronic Packages
J. Electron. Packag (September,2000)
Thermal Interfacing Techniques for Electronic Equipment—A Perspective
J. Electron. Packag (June,2003)
Related Proceedings Papers
Related Chapters
Cooling of a Chip Utilizing a Heat Sink with Rectangular Fins
Everyday Heat Transfer Problems: Sensitivities to Governing Variables
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment, Second Edition