This article is a principle-based review of a growing body of fundamental research that documents the opportunity for optimizing geometrically the cooling of spaces (e.g., electronics packages) that generate heat volumetrically. The chief result of geometric optimization is the identification of an optimal internal structure—optimal spacings between components (e.g., plates and fins), optimal sizes and aspect ratios for cooling channels, and optimal frequencies for pulsating flows. The origin of these optimal geometric features—the construction of the system—lies in the global effort to use every infinitesimal volume to the maximum, i.e., to pack the volume not only with the most heat generating components, but also with the ‘most’ coolant, in such a way that every fluid packet is engaged effectively in cooling. The optimal aspect ratio for ducts with forced and natural convection corresponds to the special geometry and flow conditions where boundary layers meet just as the coolant exits the channel. This “constructal” design principle is illustrated by several classes of examples: laminar forced and natural convection, and various internal arrangements (parallel plates, staggered plates, cylinders in cross flow, square pins with impinging flow). General trends (scaling laws) of optimal geometric form are revealed by the optimal-structure results, this, in spite of the diversity of the optimized configurations.
Skip Nav Destination
Article navigation
June 2003
Technical Papers
Optimal Internal Structure of Volumes Cooled by Single-Phase Forced and Natural Convection
Adrian Bejan, Fellow ASME, J. A. Jones Professor of Mechanical Engineering,
Adrian Bejan, Fellow ASME, J. A. Jones Professor of Mechanical Engineering,
Duke University, Durham, NC 27708-0300
Search for other works by this author on:
Adrian Bejan, Fellow ASME, J. A. Jones Professor of Mechanical Engineering,
Duke University, Durham, NC 27708-0300
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received by the EPPD Division June 5, 2001. Associate Editor: Y. Muzychka.
J. Electron. Packag. Jun 2003, 125(2): 200-207 (8 pages)
Published Online: June 10, 2003
Article history
Received:
June 5, 2001
Online:
June 10, 2003
Citation
Bejan, A. (June 10, 2003). "Optimal Internal Structure of Volumes Cooled by Single-Phase Forced and Natural Convection ." ASME. J. Electron. Packag. June 2003; 125(2): 200–207. https://doi.org/10.1115/1.1566970
Download citation file:
Get Email Alerts
Anand Model Constants of Sn–Ag–Cu Solders: What Do They Actually Mean?
J. Electron. Packag (June 2025)
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag (June 2025)
Related Articles
Scale Analysis of Combined Thermal Radiation and Convection Heat Transfer
J. Heat Transfer (April,2004)
An Experimental Study of Transient Heat Transfer From Discrete Heat Sources in Water Cooled Vertical Rectangular Channel
J. Electron. Packag (September,2005)
Prediction of Nusselt Number and Flow Rate of Buoyancy Driven Flow Between Vertical Parallel Plates
J. Heat Transfer (February,2004)
Analyses of Convection Heat Transfer From Discrete Heat Sources in a Vertical Rectangular Channel
J. Electron. Packag (September,2005)
Related Proceedings Papers
Related Chapters
Hitting the Wall
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Mixed-Up Convection
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Cooling of Steel Spherical Balls by Natural Convection and Radiation Heat Transfer in Unsteady State
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life