Three analytical models are presented for determining laminar, forced convection heat transfer from isothermal cuboids. The models can be used over a range of Reynolds number, including at the diffusive limit where the Reynolds number goes to zero, and for a range of cuboid aspect ratios from a cube to a flat plate. The models provide a simple, convenient method for calculating an average Nusselt number based on cuboid dimensions, thermophysical properties and the approach velocity. Both the cuboid and the equivalent flat plate models are strongly dependent upon the flow path length which is bounded between two easily calculated limits. In comparisons with numerical simulations, the models are shown to be within ±6 percent over the range of and aspect ratios between 0 and 1.
Skip Nav Destination
Article navigation
September 2001
Technical Papers
Simplified Analytical Models for Forced Convection Heat Transfer From Cuboids of Arbitrary Shape
J. R. Culham, Associate Professor and Director, Mem. ASME,
J. R. Culham, Associate Professor and Director, Mem. ASME
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
Search for other works by this author on:
M. M. Yovanovich, Distinguished Professor Emeritus, Fellow ASME,
M. M. Yovanovich, Distinguished Professor Emeritus, Fellow ASME
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
Search for other works by this author on:
P. Teertstra, Research Associate,
P. Teertstra, Research Associate
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
Search for other works by this author on:
C.-S. Wang,
C.-S. Wang
Advanced Thermal Solutions, Newton, MA
Search for other works by this author on:
G. Refai-Ahmed, Mem. ASME,
G. Refai-Ahmed, Mem. ASME
Solinet Systems, Ottawa, ON, Canada
Search for other works by this author on:
Ra-Min Tain
Ra-Min Tain
Nortel Metworks, Kanata, ON, Canada
Search for other works by this author on:
J. R. Culham, Associate Professor and Director, Mem. ASME
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
M. M. Yovanovich, Distinguished Professor Emeritus, Fellow ASME
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
P. Teertstra, Research Associate
Microelectronics Heat Transfer Laboratory, Department of Mechanical Engineering, University of Waterloo, Waterloo, ON, Canada
C.-S. Wang
Advanced Thermal Solutions, Newton, MA
G. Refai-Ahmed, Mem. ASME
Solinet Systems, Ottawa, ON, Canada
Ra-Min Tain
Nortel Metworks, Kanata, ON, Canada
Contributed by the Electrical and Electronic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received at ASME Headquarters October 13, 2000. Associate Editor: R. Schmidt.
J. Electron. Packag. Sep 2001, 123(3): 182-188 (7 pages)
Published Online: October 13, 2000
Article history
Received:
October 13, 2000
Citation
Culham, J. R., Yovanovich, M. M., Teertstra, P., Wang, C., Refai-Ahmed, G., and Tain, R. (October 13, 2000). "Simplified Analytical Models for Forced Convection Heat Transfer From Cuboids of Arbitrary Shape ." ASME. J. Electron. Packag. September 2001; 123(3): 182–188. https://doi.org/10.1115/1.1347993
Download citation file:
Get Email Alerts
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Related Articles
An Experimental Study of Transient Heat Transfer From Discrete Heat Sources in Water Cooled Vertical Rectangular Channel
J. Electron. Packag (September,2005)
Optimal Internal Structure of Volumes Cooled by Single-Phase Forced and Natural Convection
J. Electron. Packag (June,2003)
Flow and Heat Transfer Over a Continuously Moving Flat Plate in a Porous Medium
J. Heat Transfer (May,2011)
Estimation of the Onset of Longitudinal Vortices in a Laminar Boundary Layer Heated From Below
J. Heat Transfer (November,1995)
Related Proceedings Papers
Related Chapters
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Cavitation CFD Prediction for NACA0015 Hydrofoil Flow Considering Boundary Layer Characteristics
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Heat Transfer Enhancement by Using Nanofluids in Laminar Forced Convection Flows Considering Variable Properties
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)