In this paper, a method based on image analysis is introduced to produce a 3-dimensional picture of a solder joint. This 3-D image gives a detailed view of the solder contour and the fatigue cracks inside the solder. The practical example is a surface mount 1206 ceramic capacitor which has been soldered on a FR4 board with Sn62Pb36Bi2 solder. The assembly has been through severe temperature cycling. The 3-D image is created by first making several (≈15) micrographs of the cross-section of the joint until the whole joint has been examined. The photopositives are then scanned with a black and white scanner. To each of the scanned micrographs the contours of component metallisation, copper pad and solder are marked manually using an image processing program. Another program has been developed to extract the marked contours from the scanned images and to place them on a CAD-file with the correct distance between them. With CAD the 3-D image of the contours can be viewed from different view points and also the fatigue crack inside the joint can be seen and measured.

Issue Section:
Technical Papers
Topics:
Fracture (Materials), Shapes, Solder joints, Solders, Computer-aided design, Fatigue cracks, Capacitors, Ceramics, Copper, Image processing, Manufacturing, Surface mount packaging, Temperature
1.
Lau J. H. and Rice D. W., “Solder Joint Fatigue in Surface Mount Technology: State of the Art”, Solid State Technology, Oct. 1985, p. 91.
2.
De Kluizenaar E. E., “Reliability of Soldered Joints: A Description of the State of the Art,” Part 1, Soldering and Surface Mount Technology, No. 4, Feb. 1990, p. 27.
3.
De Kluizenaar E. E., “Reliability of Soldered Joints: A Description of the State of the Art,” Part 2, Soldering and Surface Mount Technology, No. 5, June 1990, p. 56.
4.
De Kluizenaar E. E., “Reliability of Soldered Joints: A Description of the State of the Art,” Part 3, Soldering and Surface Mount Technology, No. 6, Oct. 1990, p. 18.
5.
Wulff
F. W.
,
Ahrens
T.
, “
Defects in Surface Mount Interconnections
,”
Practical Metallography
, Vol.
31
, No.
6
,
1994
, p.
307
307
.
6.
Tranto J., “Microstructural Response of Reflow Soldered Joints to Thermomechanical Fatigue,” Thesis, Engineering Academy of Denmark (performed in CEM GmbH), 1992.
This content is only available via PDF.
Copyright © 1995
 by The American Society of Mechanical Engineers
You do not currently have access to this content.