... O 1.95 (GDC10) and silver powders were used for higher ionic and electronic conductivities, respectively. In the cell system, the spinel phase is in contact with the YSZ electrolyte (high oxygen ion conductivity), and GDC10 which is a mixed ionic electronic oxide (MIEC) can be additionally added...

... Spectroscopy in State of Health Estimation for Lithium-Ion Batteries ,” Appl. Energy , 322 ( 15 ), p. 14 . [9] Liu , F. , Liu , X. , Su , W. , Lin , H. , Chen , H. , and He , M. , 2020 , “ An Online State of Health Estimation Method Based on Battery Management System...

...Siyuan Li; Zhe Zhang; Guoxiang Li; Shuzhan Bai A novel after-burner used for the heat-up and normal operating conditions of a metal-supported planar solid oxide fuel cell (SOFC) system, is designed and experimentally studied in this paper. The burner construction and the calculation of maximum...

...Yan Wang; Hewu Wang; Qing Gao; Xiaohang Zhang; Xilong Zhang; Zunmin Liu The heat pump system employed with a dual evaporator for battery cooling coupled with cabin comfort is an innovative thermal management method. It can be inferred that the refrigerant thermal load distribution can trigger...

...Siyuan Li; Zhe Zhang; Guoxiang Li; Shuzhan Bai Solid oxide fuel cell (SOFC) is a clean and efficient energy utilization technology. Partial oxidation reforming (POX) can be used to simplify the SOFC system structure, but its lower hydrogen production rate deteriorates the system performance. A wise...

...Elham Sahraei; Mohammad Mehdi Keshavarzi; Xiaowei Zhang; Benjamin Lai Mechanical abusive loadings, as an inevitable consequence of road accidents, can damage the embedded energy storage system in an electric vehicle and deform its constitutive parts, e.g., the lithium-ion batteries. Therefore...

...Chi Nguyen Van Cell balancing control for Li-ion battery pack plays an important role in the battery management system. It contributes to maintaining the maximum usable capacity, extending the cycle life of cells, and preventing overheating and thermal runaway during operation. This paper presents...

... on the electrode creation conditions. This model will help to optimize the design of all-solid-state batteries and can be the key to further performance improvement. References [1] Inoue , G. , 2016 , “ Secondary Batteries and Fuel Cell Systems for Next-Generation Vehicles ,” Energy Technology...

...@tom.com 17 07 2021 10 12 2021 12 12 2021 18 01 2022 analysis and design of components devices and systems batteries electrochemical storage reliability Lithium-ion batteries are becoming more and more popular in various fields [ 1 ]. Commonly, the voltage...

... simultaneously. The proposed method is ideal for lithium-ion battery systems to offer the improved performances as compared with traditional sequential optimization approaches due to the integration of strong coupling effects between electrode design and control optimization. The integrated adaptive surrogate...

...Weijie Liu; Hongliang Zhou; Zeqiang Tang; Tianxiang Wang Accurate estimation of state of charge (SOC) is the basis of battery management system. The fractional-order theory is introduced into the resistance-capacitance (RC)model of lithium battery, and adaptive genetic algorithm is used to identify...

... 2021 17 07 2021 11 08 2021 lithium-ion capacitor anode ferric oxide electrochemical performance solid electrolyte interphase analysis and design of components devices and systems electrochemical capacitors Commercial Li-ion batteries (LIBs) show low power density, which...

...Abdelaziz Zaidi; Asma Charaabi; Oscar Barambones; Nadia Zanzouri The model-based system engineering (MBSE) is based on simplified mathematical models that reflect the dynamic behavior of the systems. These are most of the time nonlinear and need control schemes taking in consideration of exogenous...

... circuit voltage (OCV) and cell temperature was used in the development of the linear regression-based machine learning algorithm. The peak temperature was selected as the indicator of battery end of discharge. A battery management system (BMS) using a pyboard microcontroller was constructed to monitor...

...-Sized Metallic Systems: Intrinsic Versus Extrinsic Size Effect ,” Prog. Mater. Sci. , 56 ( 6 ), pp. 654 – 724 . 10.1016/j.pmatsci.2011.01.005 [21] Yu , S. , and Siegel , D. J. , 2018 , “ Grain Boundary Softening: A Potential Mechanism for Lithium Metal Penetration Through Stiff...

... vehicles have been widely developed in recent years. The maximum temperature and temperature consistency of the battery pack in the electric vehicle have a great influence on the life and safety of the battery. In this paper, the thermal management system of the lithium battery pack was taken...

... advanced materials characterization analysis and design of components devices and systems batteries In recent years, electric vehicles (EVs) are becoming more common and are utilizing higher capacity lithium-ion battery (LIB) packs on road ways around the world. These leaps in technological...

... the current collector, which is considered to be one of the main reasons for the capacity degradation of LIB. To reduce diffusion-induced stress of the electrode system during lithium-ion diffusion, a chemo-mechanical coupled theoretical model of bilayer electrode system of electrode layer bonded...

... 11 05 2020 silicon anode crack pattern multi-physics modeling GP-based surrogate model analysis and design of components devices and systems batteries reliability durability and damage tolerance Secondary (rechargeable) lithium ion batteries (LIBs) outperform other battery...

...@uoguelph.ca Email: rclemmer@uoguelph.ca Email: gadsden@uoguelph.ca Email: stasnim@uoguelph.ca 22 10 2019 19 03 2020 20 03 2020 09 04 2020 analysis and design of components devices and systems batteries flow batteries As the demand for sustainable...