Skip Nav Destination
Issues
October 2012
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Exergy, Economic, and Environmental Analysis of a PEM Fuel Cell Power System to Meet Electrical and Thermal Energy Needs of Residential Buildings
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051001.
doi: https://doi.org/10.1115/1.4006049
Topics:
Fuel cells
,
Residential construction
,
Temperature
,
Water
,
Exergy
,
Nitrogen
,
Carbon dioxide
,
Entropy
,
Fuels
Inductive Effect on the Fuel Cell Cathode Impedance Spectrum at High Frequencies
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051002.
doi: https://doi.org/10.1115/1.4007115
A Parametric Study of Bipolar Plate Structural Parameters on the Performance of Proton Exchange Membrane Fuel Cell
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051003.
doi: https://doi.org/10.1115/1.4006797
Topics:
Catalysts
,
Current density
,
Electrodes
,
Flow (Dynamics)
,
Fuel cells
,
Membranes
,
Oxygen
,
Plates (structures)
,
Porosity
,
Proton exchange membrane fuel cells
On the Identification of Impedance Spectroscopy Processes of an SOFC Under Different Hydrogen Concentrations
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051004.
doi: https://doi.org/10.1115/1.4007220
Topics:
Anodes
,
Diffusion (Physics)
,
Electrochemical impedance spectroscopy
,
Hydrogen
,
Solid oxide fuel cells
,
Circuits
,
Fuels
,
Electrodes
,
Testing
,
Charge transfer
Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051005.
doi: https://doi.org/10.1115/1.4007136
Topics:
Bonding
,
Electrodes
,
Membrane electrode assemblies
,
Membranes
,
Pressure
,
Sealing (Process)
,
Temperature
,
Low temperature
,
Manufacturing
,
Optimization
Electrical Properties of Sr0.86Y0.08TiO3 Under Redox and Full Cell Fabrication Conditions
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051006.
doi: https://doi.org/10.1115/1.4007117
Component Failure Analysis From a Stationary Proton Exchange Membrane Fuel Cell Demonstration
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051007.
doi: https://doi.org/10.1115/1.4007116
Topics:
Fuel cells
,
Manifolds
,
Natural gas
,
Proton exchange membrane fuel cells
,
Hydrogen
,
Filters
,
Failure analysis
,
Failure
,
Fuels
Optimizing the Anode Structure of a Passive Tubular-Shaped Direct Methanol Fuel Cell to Operate With High Concentration Methanol
J. Fuel Cell Sci. Technol. October 2012, 9(5): 051008.
doi: https://doi.org/10.1115/1.4007274
Topics:
Anodes
,
Direct methanol fuel cells
,
Fuel efficiency
,
Methanol
,
Power density
,
Fuels
Technical Briefs
Critique and Improvement of a One-Dimensional Semianalytical Model of a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol. October 2012, 9(5): 054501.
doi: https://doi.org/10.1115/1.4006842
Email alerts
RSS Feeds
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
In-situ synthesis nano PtRuW/WC HER catalyst for acid hydrogen evolution by microwave method
J. Electrochem. En. Conv. Stor
Joint Model Parameter Identification and Extended Kalman Filter Algorithm for the State of Charge Estimation of Lithium Iron Phosphate Battery
J. Electrochem. En. Conv. Stor (August 2025)
Ultrasound-Enabled Adaptive Protocol for Fast Charging of Lithium-Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)