This paper presents an intelligent digital image correlation technique that uses genetic algorithms to measure surface displacements and strains. Speckle patterns are spray painted on the surface of interest and pictures taken before and during loading. Subpixel resolution, required for measuring displacements and strains accurately, is obtained by using interpolation methods. An innovative procedure based on genetic algorithms (GA) is used that has the potential to give the two displacements and four deformation gradients directly for a subset being investigated. This paper presents the algorithm for the six variables, but uses only the displacements (two variables) to calculate the 2-D strain fields. The genetic algorithms can guarantee a solution based on a comprehensive calibration procedure. The focus of this paper is the description of the GA routine used for the search process as well as the calibration scheme. Measurement results are presented for rigid-body displacement, 1-D and 2-D strain as proof of concept. Some potential applications for this work are to extract surface displacements and strains on the surfaces of aircraft, spacecraft and reusable launch vehicles, submarine and ship hulls, civil infrastructures such as bridges, dams and buildings, and biomedical imaging applications.

Issue Section:
Technical Papers
Keywords:
displacement measurement, genetic algorithms, strain measurement, speckle, image resolution, interpolation, calibration
Topics:
Displacement, Genetic algorithms, Interpolation, Resolution (Optics), Calibration, Deformation, Algorithms
1.
Fraley, J. E., Hamed, M. A., Peters, W. H., and Ranson, W. F., 1981, “Experimental Boundary Integral Equation Application in Speckle Interferometry,” Proc. 1981 SESA Spring Conference, pp. 68–71.
2.
Peters
,
W. H.
, and
Ranson
,
W. F.
,
1982
, “
Digital Imaging Techniques in Experimental Stress Analysis
,”
Optical Engineering
,
21
, pp.
427
–
431
.
3.
Chu
,
T. C.
,
Ranson
,
W. F.
,
Sutton
,
M. A.
, and
Peters
,
W. H.
,
1986
, “
Application of Digital Image-Correlation Techniques to Experimental Mechanics
,”
Exp. Mech.
,
26
, pp.
230
–
237
.
4.
Sutton
,
M. A.
,
Cheng
,
M.
,
Peters
,
W. H.
,
Chao
,
Y. J.
, and
McNeil
,
S. R.
,
1986
, “
Application of an Optimized Digital Correlation Method to Planar Deformation Analysis
,”
Image Vis. Comput.
,
4
, pp.
143
–
150
.
5.
Kahn-Jetter
,
Z. L.
, and
Chu
,
T. C.
,
1990
, “
Three-Dimensional Displacement Measurements Using Digital Image Correlation and Photogrammic Analysis
,”
Exp. Mech.
,
30
, pp.
10
–
16
.
6.
Kahn-Jetter, Z. L., and Chu, T. C., 1986, “The Use of Digital Image Correlation Techniques and Stereoscopic Analysis for Measurement of Deformation on a Warped Surface,” Proceedings of the 1986 SEM Spring Conference, pp. 820–826.
7.
Chao, Y. J., Sutton, M. A., Peters, W. H., and Luo, P. F., 1989, “Measurement of Three Dimensional Displacements in Deformable Bodies by Digital Imaging Processing,” Proceedings of the 1989 SEM Spring Conference, pp. 139–146.
8.
Bastawros
,
A. F.
,
Bart-Smith
,
H.
, and
Evans
,
A. G.
,
2000
, “
Experimental Analysis of Deformation Mechanisms in Closed Cell Aluminum Alloy Foam
,”
J. Mech. Phys. Solids
,
48
, No.
2
, pp.
301
–
322
.
9.
Vendroux
,
G.
, and
Knauss
,
W. G.
,
1998
, “
Submicron Deformation Fields Measurements: Part 1. Developing a Digital Scanning Tunneling Microscope
,”
Exp. Mech.
,
38
, No.
2
, pp.
18
–
23
.
10.
Vendroux
,
G.
, and
Knauss
,
W. G.
,
1998
, “
Submicron Deformation Fields Measurements: Part 2. Improved Digital Image Correlation
,”
Exp. Mech.
,
38
, No.
2
, pp.
86
–
92
.
11.
Vendroux
,
G.
, and
Knauss
,
W. G.
,
1998
, “
Submicron Deformation Fields Measurements: Part 3. Demonstration of Deformation Determinations
,”
Exp. Mech.
,
38
, No.
3
, pp.
154
–
160
.
12.
Tong
,
W.
,
1997
, “
Detection of Plastic Deformation Patterns in a Binary Aluminum Alloy
,”
Exp. Mech.
,
37
, Dec, pp.
452
–
459
.
13.
Lu
,
H.
,
Vendroux
,
G.
, and
Knauss
,
W. G.
,
1997
, “
Surface Deformation Measurements of a Cylindrical Specimen by Digital Image Correlation
,”
Exp. Mech.
,
37
, Dec, pp.
433
–
439
.
14.
Haupt, R. L., and Haupt, S. E., “Practical Genetic Algorithms,” John Wiley & Sons, Inc., New York, 1999.
15.
Brooks
,
R. R.
,
Iyengar
,
S. S.
, and
Chen
,
J.
,
1996
, “
Automatic Correlation and Calibration of Noisy Sensor Readings Using Elite Genetic Algorithms
,”
Artif. Intell.
,
84
, July, pp.
339
–
354
.
16.
Melikian
,
S.
,
1999
, “
Geometric Searching Improves Machine Vision
,”
Lasers & Optronics
,
18
, Num. 7, pp.
13
–
15
.
17.
Seiffert, U., and Michaelis, B., 1994, “Estimating Motion Parameter From Image Sequences by Self-Organizing Maps,” Proceedings of the 39th International Scientific Colloquium, Technical University of Ilmenau, Germany, pp. 1–8.
18.
Mahajan, A., Pilch, A., and Chu, T., 2000, “Intelligent Image Correlation Using Genetic Algorithms in the Autonomous Inspection of Structures,” Proceedings of the American Controls Conference, Chicago, Illinois, June, pp. 460–461.
19.
Pilch, A., Mahajan, A., and Chu, T., “Intelligent Image Correlation Using Genetic Algorithms for Measuring Surface Displacements and Deformations,” Proceedings of the ASME 2001 IMECE, Vol. 2, New York, New York, Nov. 2001.
Copyright © 2004
 by ASME
You do not currently have access to this content.