Mechanical properties of human trabecular bone play an important role in age-related bone fragility and implant stability. Microfinite element (μFE) analysis allows computing the apparent elastic properties of trabecular bone for use in homogenized FE (hFE) analysis, but the results depend unfortunately on the type of applied boundary conditions (BCs). In this study, 167 human femoral trabecular cubic regions with a side length of 5.3 mm were extracted from three proximal femora and analyzed using μFE analysis to compare systematically their stiffness with kinematic uniform BCs (KUBCs) and periodicity-compatible mixed uniform BCs (PMUBCs). The obtained elastic constants were then used in the volume fraction and fabric-based orthotropic Zysset–Curnier model to identify their respective model parameters. As expected, PMUBCs lead to more compliant apparent elastic properties than KUBCs, especially in shear. The differences in stiffness decreased with bone volume fraction and mean intercept length (MIL). Unlike KUBCs, PMUBCs were sensitive to heterogeneity of the biopsies. The Zysset–Curnier model fitted the apparent elastic constants successfully in both cases with adjusted coefficients of determination () of 0.986 for KUBCs and 0.975 for PMUBCs. The proper use of these BCs for hFE analysis of whole bones will need to be investigated in future work.
Issue Section:
Research Papers
Topics:
Bone,
Elasticity,
Stiffness,
Tensors,
Textiles,
Linear systems,
Errors,
Kinematics,
Boundary-value problems
References
1.
Silva
, M. J.
, Keaveny
, T. M.
, and Hayes
, W. C.
, 1998
, “Computed Tomography-Based Finite Element Analysis Predicts Failure Loads and Fracture Patterns for Vertebral Sections
,” J. Orthop. Res.
, 16
(3
), pp. 300
–308
.10.1002/jor.11001603052.
Cody
, D. D.
, Gross
, G. J.
, Hou
, F. J.
, Spencer
, H. J.
, Goldstein
, S. A.
, and Fyhrie
, D. P.
, 1999
, “Femoral Strength is Better Predicted by Finite Element Models Than QCT and DXA
,” J. Biomech.
, 32
(10
), pp. 1013
–1020
.10.1016/S0021-9290(99)00099-83.
Keyak
, J.
, Kaneko
, T.
, Tehranzadeh
, J.
, and Skinner
, H.
, 2005
, “Predicting Proximal Femoral Strength Using Structural Engineering Models
,” Clin. Orthop. Relat. Res.
, 437
, pp. 219
–228
.10.1097/01.blo.0000164400.37905.224.
Keaveny
, T. M.
, 2010
, “Biomechanical Computed Tomography-Noninvasive Bone Strength Analysis Using Clinical Computed Tomography Scans
,” Ann. N.Y. Acad. Sci.
, 1192
(1
), pp. 57
–65
.10.1111/j.1749-6632.2009.05348.x5.
Ün
, K.
, Bevill
, G.
, and Keaveny
, T. M.
, 2006
, “The Effects of Side-Artifacts on the Elastic Modulus of Trabecular Bone
,” J. Biomech.
, 39
(11
), pp. 1955
–1963
.10.1016/j.jbiomech.2006.05.0126.
Odgaard
, A.
, Hvid
, I.
, and Linde
, F.
, 1989
, “Compressive Axial Strain Distributions in Cancellous Bone Specimens
,” J. Biomech.
, 22
(8
), pp. 829
–835
.10.1016/0021-9290(89)90066-37.
Hollister
, S. J.
, and Kikuchi
, N.
, 1994
, “Homogenization Theory and Digital Imaging: A Basis for Studying the Mechanics and Design Principles of Bone Tissue
,” Biotechnol. Bioeng.
, 43
(7
), pp. 586
–596
.10.1002/bit.2604307088.
van Rietbergen
, B.
, Weinans
, H.
, Huiskes
, R.
, and Odgaard
, A.
, 1995
, “A New Method to Determine Trabecular Bone Elastic Properties and Loading Using Micromechanical Finite-Element Models
,” J. Biomech.
, 28
(1
), pp. 69
–81
.10.1016/0021-9290(95)80008-59.
Zysset
, P. K.
, Goullet
, R. W.
, and Hollister
, S. J.
, 1998
, “A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties
,” ASME J. Biomed. Eng.
, 120
(5
), pp. 640
–646
.10.1115/1.283475610.
Pahr
, D. H.
, and Zysset
, P. K.
, 2009
, “A Comparison of Enhanced Continuum FE With Micro FE Models of Human Vertebral Bodies
,” J. Biomech.
, 42
(4
), pp. 455
–462
.10.1016/j.jbiomech.2008.11.02811.
Hill
, R.
, 1963
, “Elastic Properties of Reinforced Solids: Some Theoretical Principles
,” J. Mech. Phys. Solids
, 11
(5
), pp. 357
–372
.10.1016/0022-5096(63)90036-X12.
Sanchez-Palencia
, E.
, 1980
, “Non-Homogeneous Media and Vibration Theory
,” Lecture Notes in Physics
, Vol. 127
, Springer-Verlag
, Berlin, Germany
.13.
Suquet
, P.
, 1987
, “Elements of Homogenization for Inelastic Solid Mechanics
,” Homogenization Techniques for Composite Media
, Vol. 272
, Springer
, Berlin, Germany
, pp. 193
–278
.14.
Hollister
, S. J.
, Fyhrie
, D.
, Jepsen
, K.
, and Goldstein
, S. A.
, 1991
, “Application of Homogenization Theory to the Study of Trabecular Bone Mechanics
,” J. Biomech.
, 24
(9
), pp. 825
–839
.10.1016/0021-9290(91)90308-A15.
Pahr
, D.
, and Zysset
, P.
, 2008
, “Influence of Boundary Conditions on Computed Apparent Elastic Properties of Cancellous Bone
,” Biomech. Model. Mechanobiol.
, 7
(6
), pp. 463
–476
.10.1007/s10237-007-0109-716.
Hazanov
, S.
, and Amieur
, M.
, 1995
, “On Overall Properties of Elastic Heterogeneous Bodies Smaller Than the Representative Volume
,” Int. J. Eng. Sci.
, 33
(9
), pp. 1289
–1301
.10.1016/0020-7225(94)00129-817.
Ostoja-Starzewski
, M.
, 2006
, “Material Spatial Randomness: From Statistical to Representative Volume Element
,” Probab. Eng. Mech.
, 21
(2
), pp. 112
–132
.10.1016/j.probengmech.2005.07.00718.
Kowalczyk
, P.
, 2003
, “Elastic Properties of Cancellous Bone Derived From Finite Element Models of Parameterized Microstructure Cells
,” J. Biomech.
, 36
(7
), pp. 961
–972
.10.1016/S0021-9290(03)00065-419.
Anthoine
, A.
, 1995
, “Derivation of the In-Plane Elastic Characteristics of Masonry Through Homogenization Theory
,” Int. J. Solids Struct.
, 32
(2
), pp. 137
–163
.10.1016/0020-7683(94)00140-R20.
Hazanov
, S.
, and Huet
, C.
, 1994
, “Order Relationships for Boundary Conditions Effect in Heterogeneous Bodies Smaller Than the Representative Volume
,” J. Mech. Phys. Solids
, 42
(12
), pp. 1995
–2011
.10.1016/0022-5096(94)90022-121.
Harrigan
, T. P.
, Jasty
, M.
, Mann
, R. W.
, and Harris
, W. H.
, 1988
, “Limitations of the Continuum Assumption in Cancellous Bone
,” J. Biomech.
, 21
(4
), pp. 269
–275
.10.1016/0021-9290(88)90257-622.
Cowin
, S. C.
, 1985
, “The Relationship Between the Elasticity Tensor and the Fabric Tensor
,” Mech. Mater.
, 4
(2
), pp. 137
–147
.10.1016/0167-6636(85)90012-223.
Zysset
, P. K.
, 2003
, “A Review of Morphology–Elasticity Relationships in Human Trabecular Bone: Theories and Experiments
,” J. Biomech.
, 36
(10
), pp. 1469
–1485
.10.1016/S0021-9290(03)00128-324.
Zysset
, P.
, and Curnier
, A.
, 1995
, “An Alternative Model for Anisotropic Elasticity Based on Fabric Tensors
,” Mech. Mater.
, 21
(4
), pp. 243
–250
.10.1016/0167-6636(95)00018-625.
Gross
, T.
, Pahr
, D. H.
, and Zysset
, P. K.
, 2013
, “Morphology–Elasticity Relationships Using Decreasing Fabric Information of Human Trabecular Bone From Three Major Anatomical Locations
,” Biomech. Model. Mechanobiol.
, 12
(4
), pp. 793
–800
.10.1007/s10237-012-0443-226.
Harrigan
, T. P.
, and Mann
, R. W.
, 1984
, “Characterization of Microstructural Anisotropy in Orthotropic Materials Using a Second Rank Tensor
,” J. Mater. Sci.
, 19
(3
), pp. 761
–767
.10.1007/BF0054044627.
Whitehouse
, W. J.
, 1974
, “The Quantitative Morphology of Anisotropic Trabecular Bone
,” J. Microsc.
, 101
(2
), pp. 153
–168
.10.1111/j.1365-2818.1974.tb03878.x28.
Riedler
, T. W.
, and Calvard
, S.
, 1978
, “Picture Thresholding Using an Iterative Selection Method
,” IEEE Trans. Systems, Man Cybern.
, 8
(8
), pp. 630
–632
.10.1109/TSMC.1978.431003929.
Pistoia
, W.
, Van Rietbergen
, B.
, Lochmüller
, E.-M.
, Lill
, C.
, Eckstein
, F.
, and Rüegsegger
, P.
, 2002
, “Estimation of Distal Radius Failure Load With Micro-Finite Element Analysis Models Based on Three-Dimensional Peripheral Quantitative Computed Tomography Images
,” Bone
, 30
(6
), pp. 842
–848
.10.1016/S8756-3282(02)00736-630.
Rice
, J. C.
, Cowin
, S. C.
, and Bowman
, J. A.
, 1988
, “On the Dependence of the Elasticity and Strength of Cancellous Bone on Apparent Density
,” J. Biomech.
, 21
(2
), pp. 155
–168
.10.1016/0021-9290(88)90008-5Copyright © 2015 by ASME
You do not currently have access to this content.
