A thorough understanding of ligament strains and behavior is necessary to create biomechanical models, comprehend trauma mechanisms, and surgically reconstruct those ligaments in a manner that restores a physiological performance. Measurement techniques and sensors are needed to conduct this data with high accuracy in an in vitro environment. In this work, we present a novel sensor device that is capable of continuously recording ligament strains with high resolution. The sensor principle of this biocompatible strain gauge may be used for in vitro measurements and can easily be applied to any ligament in the human body. The recently rediscovered anterolateral ligament (ALL) of the knee joint was chosen to display the capability of this novel sensor system. Three cadaver knees were tested to successfully demonstrate the concept of the sensor device and display first results regarding the elongation of the ALL during flexion/extension of the knee.
Skip Nav Destination
Article navigation
December 2014
Technical Briefs
A New Approach to Determine Ligament Strain Using Polydimethylsiloxane Strain Gauges: Exemplary Measurements of the Anterolateral Ligament
Martin Zens,
Martin Zens
1
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
e-mail: martin.zens@imtek.uni-freiburg.de
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
e-mail: martin.zens@imtek.uni-freiburg.de
1Corresponding author.
Search for other works by this author on:
Johannes Ruhhammer,
Johannes Ruhhammer
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Search for other works by this author on:
Frank Goldschmidtboeing,
Frank Goldschmidtboeing
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Search for other works by this author on:
Peter Woias,
Peter Woias
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Search for other works by this author on:
Matthias J. Feucht,
Matthias J. Feucht
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
Search for other works by this author on:
Herrmann O. Mayr,
Herrmann O. Mayr
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
Search for other works by this author on:
Philipp Niemeyer
Philipp Niemeyer
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
Search for other works by this author on:
Martin Zens
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
e-mail: martin.zens@imtek.uni-freiburg.de
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
e-mail: martin.zens@imtek.uni-freiburg.de
Johannes Ruhhammer
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Frank Goldschmidtboeing
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Peter Woias
Design of Microsystems,
Department of Microsystems Engineering (IMTEK),
Department of Microsystems Engineering (IMTEK),
Albert-Ludwigs-University Freiburg
,Freiburg D-79110
, Germany
Matthias J. Feucht
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
Herrmann O. Mayr
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
Philipp Niemeyer
Department of Orthopaedics and Trauma Surgery,
University Medical Center,
University Medical Center,
Albert-Ludwigs-University Freiburg
,Freiburg D-79095
, Germany
1Corresponding author.
Manuscript received July 4, 2014; final manuscript received October 14, 2014; accepted manuscript posted October 17, 2014; published online October 30, 2014. Assoc. Editor: Guy M. Genin.
J Biomech Eng. Dec 2014, 136(12): 124504 (5 pages)
Published Online: October 30, 2014
Article history
Received:
July 4, 2014
Revision Received:
October 14, 2014
Accepted:
October 17, 2014
Citation
Zens, M., Ruhhammer, J., Goldschmidtboeing, F., Woias, P., Feucht, M. J., Mayr, H. O., and Niemeyer, P. (October 30, 2014). "A New Approach to Determine Ligament Strain Using Polydimethylsiloxane Strain Gauges: Exemplary Measurements of the Anterolateral Ligament." ASME. J Biomech Eng. December 2014; 136(12): 124504. https://doi.org/10.1115/1.4028837
Download citation file:
Get Email Alerts
Related Articles
2016 Editors' Choice Papers
J Biomech Eng (February,2017)
The Effects of Helmet Weight on Hybrid III Head and Neck Responses by Comparing Unhelmeted and Helmeted Impacts
J Biomech Eng (October,2016)
A Reconfigurable Multiplanar In Vitro Simulator for Real-Time Absolute Motion With External and Musculotendon Forces
J Biomech Eng (December,2017)
Society Awards 2016
J Biomech Eng (February,2017)
Related Chapters
4-Bit Pipeline ADC for Monolithic Active Pixel Sensors
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)
Introduction
Mobile Wearable Nano-Bio Health Monitoring Systems With Smartphones As Base Stations
Two Advanced Methods
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine