Forward dynamic simulations of a toe-rise task were developed to explore the outcomes of plantar fasciotomy, a surgery commonly performed to relieve heel pain. The specific objectives of this study were to develop such a simulation, validate its predictions, and simulate rising on toes using a model from which the plantar fascia had been removed. Root-mean squared differences between the intact model and measurements of healthy subjects were found to be 0.009 body weights (BW) and 0.055 BW for the horizontal and vertical ground reaction forces and 7.1 mm, 11.3 mm, and 0.48 deg for the horizontal, vertical and rotational positions of the pelvis. Simulated plantar fasciotomy increased passive arch torques by 7.4%, increased metatarsal head contact forces by 18%, and resulted in greater toe flexor activity. These simulations may explain the mechanisms behind plantar fasciotomy complications when patients perform activities that require loading of the plantarflexors and the longitudinal arch.
Skip Nav Destination
Article navigation
April 2004
Technical Papers
Changes in Foot Loading Following Plantar Fasciotomy: A Computer Modeling Study
Ahmet Erdemir, Ph.D.,
Ahmet Erdemir, Ph.D.
Department of Biomedical Engineering, The Cleveland Clinic Foundation, Cleveland, OH 44195, USA
Search for other works by this author on:
Stephen J. Piazza, Ph.D.
Stephen J. Piazza, Ph.D.
Center for Locomotion Studies, Departments of Kinesiology, Mechanical Engineering, and Bioengineering, The Pennsylvania State University, University Park, PA 16802, USA
Department of Orthopaedics and Rehabilitation, The Pennsylvania State University, Hershey, PA 17033, USA
Search for other works by this author on:
Ahmet Erdemir, Ph.D.
Department of Biomedical Engineering, The Cleveland Clinic Foundation, Cleveland, OH 44195, USA
Stephen J. Piazza, Ph.D.
Center for Locomotion Studies, Departments of Kinesiology, Mechanical Engineering, and Bioengineering, The Pennsylvania State University, University Park, PA 16802, USA
Department of Orthopaedics and Rehabilitation, The Pennsylvania State University, Hershey, PA 17033, USA
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division November 15, 2002; revision received June 13, 2002. Associate Editor: M. Hull.
J Biomech Eng. Apr 2004, 126(2): 237-243 (7 pages)
Published Online: May 4, 2004
Article history
Revised:
June 13, 2002
Received:
November 15, 2002
Online:
May 4, 2004
Citation
Erdemir, A., and Piazza, S. J. (May 4, 2004). "Changes in Foot Loading Following Plantar Fasciotomy: A Computer Modeling Study ." ASME. J Biomech Eng. April 2004; 126(2): 237–243. https://doi.org/10.1115/1.1691447
Download citation file:
Get Email Alerts
How Irregular Geometry and Flow Waveform Affect Pulsating Arterial Mass Transfer
J Biomech Eng (December 2024)
Phenomenological Muscle Constitutive Model With Actin–Titin Binding for Simulating Active Stretching
J Biomech Eng (January 2025)
Image-Based Estimation of Left Ventricular Myocardial Stiffness
J Biomech Eng (January 2025)
Related Articles
Development and Validation of a Three-Dimensional Finite Element Model of the Face
J Biomech Eng (April,2009)
Design of an Endoreactor for the Cultivation of a Joint-Like-Structure
J. Med. Devices (June,2009)
A Robotic Cadaveric Flatfoot Analysis of Stance Phase
J Biomech Eng (May,2011)
Finite Element Modeling of the First Ray of the Foot: A Tool for the Design of Interventions
J Biomech Eng (October,2007)
Related Proceedings Papers
Related Chapters
Industrially-Relevant Multiscale Modeling of Hydrogen Assisted Degradation
International Hydrogen Conference (IHC 2012): Hydrogen-Materials Interactions
Advances in the Stochastic Modeling of Constitutive Laws at Small and Finite Strains
Advances in Computers and Information in Engineering Research, Volume 2
Numerical Simulation of Spatial Synergic Interaction in the Double-Row Anti-Sliding Piles
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)