The cause of cavitation in mechanical heart valves is investigated with Medtronic Hall tilting disk valves in an in vitro flow system simulating the closing event in the mitral position. Recordings of pressure wave forms and photographs in the vicinity of the inflow surface of the valve are attempted under controlled transvalvular loading rates averaged during valve closing period. The results revealed presence of a local flow field with a very high velocity around the seat stop of mechanical heart valves that could induce pressure reduction below liquid vapor pressure and a cloud of cavitation bubbles. The analysis of the results indicates that the “fluid squeezing” between the stop and occluder as the main cause of cavitation in Medtronic Hall valves. The threshold loading rate for cavitation initiation around the stop was found to be very low (300 and 400 mmHg/s; half the predicted normal human loading rate that was estimated to be 750 mmHg/s) because even a mild impact created a high speed local flow field on the occluder surface that could induce pressure reduction below vapor pressure. The present study suggests that mechanical heart valves with stops at the edge of major orifice region are more vulnerable to cavitation, and hence, have higher potential for damage on valve components and formed elements in blood.
Skip Nav Destination
Article navigation
February 1996
Technical Papers
Cavitation Dynamics of Medtronic Hall Mechanical Heart Valve Prosthesis: Fluid Squeezing Effect
C. S. Lee,
C. S. Lee
University of Iowa, Iowa City, IZ 52242
Search for other works by this author on:
K. B. Chandran,
K. B. Chandran
Departments of Biomedical and Mechanical Engineering, University of Iowa, Iowa City, IA 52242
Search for other works by this author on:
L. D. Chen
L. D. Chen
University of Iowa, Iowa City, IA 52242
Search for other works by this author on:
C. S. Lee
University of Iowa, Iowa City, IZ 52242
K. B. Chandran
Departments of Biomedical and Mechanical Engineering, University of Iowa, Iowa City, IA 52242
L. D. Chen
University of Iowa, Iowa City, IA 52242
J Biomech Eng. Feb 1996, 118(1): 97-105 (9 pages)
Published Online: February 1, 1996
Article history
Received:
July 21, 1993
Revised:
December 4, 1994
Online:
October 30, 2007
Citation
Lee, C. S., Chandran, K. B., and Chen, L. D. (February 1, 1996). "Cavitation Dynamics of Medtronic Hall Mechanical Heart Valve Prosthesis: Fluid Squeezing Effect." ASME. J Biomech Eng. February 1996; 118(1): 97–105. https://doi.org/10.1115/1.2795951
Download citation file:
Get Email Alerts
A New Dissipation Function to Model the Rate-Dependent Mechanical Behavior of Semilunar Valve Leaflets
J Biomech Eng (July 2023)
Muscle Constitutive Model With a Tangent Modulus Approximation: Ansys Implementation and Verification
J Biomech Eng (July 2023)
Related Articles
A Detailed Fluid Mechanics Study of Tilting Disk Mechanical Heart Valve Closure and the Implications to Blood Damage
J Biomech Eng (August,2008)
Transient Behavior Analysis of a Mechanical Monoleaflet Heart Valve Prosthesis in the Closing Phase
J Biomech Eng (November,1994)
A Method for Real-Time In Vitro Observation of Cavitation on Prosthetic Heart Valves
J Biomech Eng (November,1994)
The Osmotic Swelling Characteristics of Cardiac Valve Prostheses
J Biomech Eng (August,2000)
Related Proceedings Papers
Related Chapters
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
Numerical Investigation of the Dynamics of Pressure Loading on a Solid Boundary from a Collapsing Cavitation Bubble
Proceedings of the 10th International Symposium on Cavitation (CAV2018)