Abstract
Hemming is a material processing technology widely used in major sectors such as automotive and aerospace industries. As a mechanical joining process, hemming is applied to sheet metal components to build structural assemblies. In conventional hemming methods, dies and presses are used by designing product-specific tooling. In recent years, robot technologies have been integrated into this specific process to benefit from the advantages of flexible manufacturing systems. In this paper, a state-of-the-art review of the hemming process is presented based on a literature review. Since there is no background of collected works and systematic reviews, this work summarizes all the details and key points about hemming. This review fulfills the need for compiled knowledge at the right time because of two main reasons. First, there is no review currently on this issue to enlighten both industry and academia. Second, hemming technologies have been enhanced by the leading industrial companies without any contributions of written sources to the literature. In this work, the evolution of hemming technology is given from past to present. Deformation mechanisms in different hemming methods are presented. Effects of process parameters are discussed in terms of product quality, mechanics of materials, and manufacturing aspects. Lastly, recent developments in hemming technologies are given. Despite the availability of alternative joining methods, hemming remains at the forefront of metal joining processes due to its unrivaled simplicity.
Issue Section:
Review Articles
References
1.
Böllinghaus
,
T.
, Byrne, G., Cherpakov, B., Chlebus, E., Cross, C., Denkena, B., Dilthey, U., et al., 2009
, “
Manufacturing Engineering
,” Springer Handbook of Mechanical Engineering
,
K.-H.
Grote
and
E. K.
Antonsson
, eds.,
Springer Berlin Heidelberg
,
Berlin, Heidelberg
, pp. 523
–785
.2.
Autotech, 2019, “How Much Does An Accident Diminish a Car's Value?,” Autotech Collision Service, Sewell, NJ, accessed Oct. 13, 2019, https://www.autotechcollision.com/diminished-value-claims/
3.
Gürgen
,
S.
, 2016
, “
Numerical Simulation of Roller Hemming Operation on Convex Edge-Convex Surface Parts
,” Adv. Eng. Forum
,
15
, pp. 75
–84
.10.4028/www.scientific.net/AEF.15.754.
Gürgen
,
S.
,
Gökler
,
M. İ.
,
Darendeliler
,
H.
,
Çelikkaya
,
Ç. C.
, and
Erden
,
K.
, 2013
, “Analysis of Roller Hemming Process for a Vehicle Tailgate Closure,” AIP Conference Proceedings
, Shenyang, China, pp. 367
–374
.10.1063/1.48068485.
European Aluminium Association,
2015
, “
Mechanical Joining
,” Aluminium Automotive Manual
, Brussels, Belgium, pp. 1
–66
.6.
Lee
,
K.-H.
,
Ko
,
D.-C.
,
Lee
,
J.-M.
,
Lee
,
C.-J.
,
Lee
,
S.-B.
, and
Kim
,
B.-M.
, 2016
, “
Manufacturing Process of Bezel Frame for Strength-Reinforced TFT LCD Module by Progressive Hemming of SUS304 Stainless Steel Sheet
,” J. Mech. Sci. Technol.
,
30
(3
), pp. 1103
–1109
.10.1007/s12206-016-0214-67.
Jianjun
,
L.
, and
Wenfeng
,
Z.
, 2019
, “
Numerical Simulation of the Roller Hemming Process Based on Pressure-Viscosity Effect
,” Int. J. Adv. Manuf. Technol.
,
105
(1–4
), pp. 1023
–1039
.10.1007/s00170-019-04237-58.
Svensson
,
M.
, and
Mattiasson
,
K.
, 2002
, “
Three-Dimensional Simulation of Hemming With the Explicit FE-Method
,” J. Mater. Process. Technol.
,
128
(1–3
), pp. 142
–154
.10.1016/S0924-0136(02)00441-79.
Li
,
J.
,
Zhu
,
W.
,
Sun
,
H.
, and
Tang
,
G.
, 2022
, “
Multi-Physics Modeling and Simulations on the Curing Process of One-Component Hemming Adhesive Under Temperature Cycle
,” J. Adhes. Sci. Technol.
, 36(5), pp. 507
–530
.10.1080/01694243.2021.192901510.
Mortimer
,
J.
, 2004
, “
Adhesive Bonding of Car Body Parts by Industrial Robot
,” Ind. Robot Int. J
,
31
(5
), pp. 423
–428
.10.1108/0143991041055183611.
Zhang
,
G.
,
Hao
,
H.
,
Wu
,
X.
,
Hu
,
S. J.
,
Harper
,
K.
, and
Faitel
,
W.
, 2000
, “
An Experimental Investigation of Curved Surface-Straight Edge Hemming
,” J. Manuf. Process.
,
2
(4
), pp. 241
–246
.10.1016/S1526-6125(00)70025-912.
Gürgen
,
S.
, 2019
, “
Numerical Modeling of Roller Hemming Operation on a Straight Edge Part
,” J. Braz. Soc. Mech. Sci. Eng.
,
41
(11
), p. 512
.10.1007/s40430-019-2030-213.
Gürgen
,
S.
, 2019
, “
A Parametric Investigation of Roller Hemming Operation on a Curved Edge Part
,” Arch. Civ. Mech. Eng.
,
19
(1
), pp. 11
–19
.10.1016/j.acme.2018.07.00914.
Gürgen
,
S.
, 2011
, “
Analysis of Roller Hemming Process for a Vehicle Tailgate Closure
,” Master thesis,
Middle East Technical University
, Ankara, Turkey.15.
Livatyali
,
H.
, and
Larris
,
S. J.
, 2004
, “
Experimental Investigation on Forming Defects in Flat Surface–Convex Edge Hemming: Roll, Recoil and Warp
,” J. Mater. Process. Technol.
,
153–154
, pp. 913
–919
.10.1016/j.jmatprotec.2004.04.42516.
Lin
,
G.
,
Koç
,
M.
,
Hu
,
J.
, and
Cai
,
W.
, 2004
, “
Three-Dimensinal Numerical Simulations of Curved Edge-Curved Surface Hemming of Aluminum Alloy
,” ASME
Paper No. IMECE2004-60705.10.1115/IMECE2004-6070517.
Maoût
,
N. L.
,
Thuillier
,
S.
,
Manach
,
P. Y.
, and
Pauvert
,
O.
, 2008
, “
Numerical Simulation of the Hemming Process—Integration in the Virtual Design of Automotive Parts
,” Numisheet 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
,
Interlaken
,
Switzerland
, Sept. 1–5, pp. 1
–6
.https://www.researchgate.net/publication/280816845_Numerical_simulation_of_the_hemming_process_-_Integration_in_the_virtual_design_of_automotive_parts18.
Espinosa
,
R. H.
, 2006
, “Finite Element Simulation of Warm Forming Assisted Sheet Metal Bending,” Ph.D. thesis,
University of Detroit Mercy
, Detroit, MI.19.
Totten
,
G. E.
, and
MacKenzie
,
D. S.
, 2003
, Handbook of Aluminum
,
Marcel Dekker
,
Hoboken, NJ
.20.
Stoudt
,
M. R.
,
Hubbard
,
J. B.
,
Carsley
,
J. E.
, and
Hartfield-Wünsch
,
S. E.
, Jul. 2014
, “
Characterizing the Hemming Performance of Automotive Aluminum Alloys With High-Resolution Topographic Imaging
,” ASME J. Eng. Mater. Technol.
,
136
(3
), p. 031001
.10.1115/1.402709321.
Maoût
,
N. L.
,
Thuillier
,
S.
, and
Manach
,
P. Y.
, 2009
, “
Aluminum Alloy Damage Evolution for Different Strain Paths – Application to Hemming Process
,” Eng. Fract. Mech.
,
76
(9
), pp. 1202
–1214
.10.1016/j.engfracmech.2009.01.01822.
Livatyali
,
H.
,
Laxhuber
,
T.
, and
Altan
,
T.
, 2004
, “
Experimental Investigation of Forming Defects in Flat Surface–Convex Edge Hemming
,” J. Mater. Process. Technol.
,
146
(1
), pp. 20
–27
.10.1016/S0924-0136(03)00840-923.
Maoût
,
N. L.
,
Thuillier
,
S.
, and
Manach
,
P. Y.
, 2010
, “
Classical and Roll-Hemming Processes of Pre-Strained Metallic Sheets
,” Exp. Mech.
,
50
(7
), pp. 1087
–1097
.10.1007/s11340-009-9297-724.
Oliveira
,
S. A. G.
, and
Neamtu
,
L.
, 2004
, “
Approaches to the Hemming Process Simulation of an Automobile Tailgate
,” European Congress on Computational Methods in Applied Sciences and Engineering
, Finland, Vol.
1
, July 24–28, pp. 1
–10
.https://www.researchgate.net/publication/242431801_Approaches_to_the_hemming_process_simulation_of_an_automobile_tailgate25.
Jonkers
,
B.
, 2006
, “
Simulation of the Robot Roller Hemming Process
,” Master thesis,
University of Twente
, Enschede, The Netherlands.26.
ABB Flexible Automation,
2010
, “Roller Hemming Head: Rolling Ahead of the Rest,”
ABB Flexible Automation
, Zurich, Switzerland.27.
Coquet
,
J. M.
, and
Noizet
,
A.
, 2017
, “Blade and Method for Crimping Metal Sheets,” Patent No. WO2017144791A1.28.
Huang
,
Y.-P.
,
Jiang
,
B.-T.
,
Wu
,
C.-H.
, and
Chang
,
J.-Y.
, 2021
, “
Vision-Based Path Guidance to Achieve Dies-Free Roller Hemming Process
,” Appl. Sci.
,
11
(12
), p. 5741
.10.3390/app1112574129.
Bargende
,
M.
,
Reuss
,
H.-C.
, and
Wiedemann
,
J.
, 2014
, 14. Internationales Stuttgarter Symposium: Automobil- Und Motorentechnik
, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren, eds.,
Springer Vieweg
,
Wiesbaden
.30.
Kraus
,
J.
, 2009
, KUKA Robot Hemming System
,
KUKA Automation Company
, Augsburg, Germany.31.
ABB Flexible Automation,
2000
, “Excellence in Hemming: Lines and Equipment for Automotive Closure Panels,” ABB Flexible Automation, Zurich, Switzerland.32.
Hönle
,
S.
,
Liewald
,
M.
,
Schmid
,
P.
, and
Sindel
,
M.
, 2014
, “
Experimental Study of Unstretched Fiber Shifting During Hemming Processes for Automotive Aluminum Alloys
,” 14. Internationales Stuttgarter Symposium
,
M.
Bargende
,
H.-C.
Reuss
, and
J.
Wiedemann
, eds.,
Springer Fachmedien Wiesbaden
,
Wiesbaden
, Germany, pp. 215
–226
.33.
Baron
,
J.
, and
Smith
,
B. C.
, 2006
, “Low-Volume Vehicle Production,” Center for Automotive Research, Ann Arbor, MI.34.
Marciniak
,
Z.
,
Duncan
,
J. L.
, and
Hu
,
S. J.
, 2002
, Mechanics of Sheet Metal Forming
, 2nd ed.,
Butterworth-Heinemann
,
Oxford, UK
.35.
Livatyali
,
H.
, and
Altan
,
T.
, 2001
, “
Prediction and Elimination of Springback in Straight Flanging Using Computer Aided Design Methods
,” J. Mater. Process. Technol.
,
117
(1–2
), pp. 262
–268
.10.1016/S0924-0136(01)01164-536.
Hu
,
X.
,
Zhao
,
Y.
,
Huang
,
S.
,
Li
,
S.
, and
Lin
,
Z.
, 2012
, “
Numerical Analysis of the Roller Hemming Process
,” Int. J. Adv. Manuf. Technol.
,
62
(5–8
), pp. 543
–550
.10.1007/s00170-011-3822-437.
Li
,
S.
,
Hu
,
X.
,
Zhao
,
Y.
,
Lin
,
Z.
, and
Xu
,
N.
, 2011
, “
Cyclic Hardening Behavior of Roller Hemming in the Case of Aluminum Alloy Sheets
,” Mater. Des.
,
32
(4
), pp. 2308
–2316
.10.1016/j.matdes.2010.09.01738.
Taub
,
A. I.
,
Krajewski
,
P. E.
,
Luo
,
A. A.
, and
Owens
,
J. N.
, 2007
, “
The Evolution of Technology for Materials Processing Over the Last 50 Years: The Automotive Example
,” JOM
,
59
(2
), pp. 48
–57
.10.1007/s11837-007-0022-739.
Arab
,
N.
, and
Javadimanesh
,
A.
, 2013
, “
Theoretical and Experimental Analysis of Deep Drawing Cylindrical Cup
,” J. Miner. Mater. Charact. Eng.
,
1
(6
), pp. 336
–342
.10.4236/jmmce.2013.1605140.
Dao
,
M.
, and
Li
,
M.
, 2001
, “
A Micromechanics Study on Strain-Localization-Induced Fracture Initiation in Bending Using Crystal Plasticity Models
,” Philos. Mag. A
,
81
(8
), pp. 1997
–2020
.10.1080/0141861010821664941.
Graf
,
A.
, and
Hosford
,
W.
, 1994
, “
The Influence of Strain-Path Changes on Forming Limit Diagrams of A1 6111 T4
,” Int. J. Mech. Sci.
,
36
(10
), pp. 897
–910
.10.1016/0020-7403(94)90053-142.
Liewald
,
M.
, and
Schleich
,
R.
, 2010
, “
Development of an Anisotropic Failure Criterion for Characterising the Influence of Curvature on Forming Limits of Aluminium Sheet Metal Alloys
,” Int. J. Mater. Form
,
3
(S1
), pp. 1175
–1178
.10.1007/s12289-010-0982-y43.
Schleich
,
R.
,
Held
,
C.
,
Sindel
,
M.
, and
Liewald
,
M.
, 2009
, “
Investigation on the Effect of Curvature and Sheet Thickness on Forming Limit Prediction for Aluminium Sheet Metal Alloys
,” Int. J. Mater. Form
,
2
(S1
), pp. 411
–414
.10.1007/s12289-009-0503-z44.
Wang
,
N.-M.
, and
Tang
,
S. C.
, 1988
, “
Analysis of Bending Effects in Sheet Forming Operations
,” Int. J. Numer. Methods Eng.
,
25
(1
), pp. 253
–267
.10.1002/nme.162025011945.
Wagner
,
S.
, and
Liewald
,
M.
, 2013
, “
Improved Failure Description in Forming of Automotive Sheet Metal Parts
,” Acad. J. Manuf. Eng.
,
11
, pp. 1
–8
.https://web.s.ebscohost.com/abstract?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=15837904&AN=88315011&h=NYDZvYe5eM4CWMSAaBD7aS8qf5DLrqAFP3nyvRw2d98ZO%2fZZTtxmR20qyzAmPmQt60qAWRloXQi2YS1zQwzHzw%3d%3d&crl=c&resultNs=AdminWebAuth&resultLocal=ErrCrlNotAuth&crlhashurl=login.aspx%3fdirect%3dtrue%26profile%3dehost%26scope%3dsite%26authtype%3dcrawler%26jrnl%3d15837904%26AN%3d8831501146.
Denninger
,
R.
,
Liewald
,
M.
,
Held
,
C.
, and
Sindel
,
M.
, 2011
, “
Investigations on Bendability of Lightweight Materials for Various Load Paths
,” The 14th International ESAFORM Conference on Material Forming
, Belfast, UK, Apr. 27–29, pp. 1601
–1605
.10.1063/1.358974547.
Schleich
,
R.
,
Sindel
,
M.
, and
Liewald
,
M.
, 2009
, “
Investigation on the Effect of Curvature on Forming Limit Prediction for Aluminium Sheet Alloys
,” Int. J. Mater. Form
,
2
(2
), pp. 69
–74
.10.1007/s12289-009-0394-z48.
Liewald
,
M.
,
Sindel
,
M.
,
Schleich
,
R.
, and
Held
,
C.
, 2008
, “Beitrag zur Verbesserung der simulativen Absicherung von biegedominierten Umformprozessen im Automobilbau
,”
GRIPS Media
, Stuttgart, Germany.49.
Lin
,
G.
,
Hu
,
S. J.
, and
Cai
,
W.
, 2009
, “
Evaluation of Formability in Bending/Hemming of Aluminum Alloys Using Plane-Strain Tensile Tests
,” ASME J. Manuf. Sci. Eng.
,
131
(5
), p. 051009
.10.1115/1.312331650.
Kitting
,
D.
,
Ofenheimer
,
A.
,
Pauli
,
H.
, and
Till
,
E. T.
, 2010
, “
A Phenomenological Concept to Predict Formability in Stretch-Bending Forming Operations
,” Int. J. Mater. Form
,
3
(S1
), pp. 1163
–1166
.10.1007/s12289-010-0979-651.
Liewald
,
M.
, and
Drotleff
,
K.
, 2014
, “
Concept of the Bending Limit Curve
,” Forming Limit Curve Workshop
, Zurich, Switzerland, Nov. 6–7, pp. 17
–22
.52.
Emmens
,
W. C.
, and
Boogaard
,
A. H.
, 2008
, “
Extended Tensile Testing With Simultaneous Bending
,” The International Deep Drawing Research Group International Conference
, Olofström, Sweden, June 16–18, pp. 1
–12
.53.
Hu
,
X.
,
Yang
,
H. J.
,
Yang
,
H. G.
, and
Dan
,
W. J.
, 2015
, “
Fracture Behaviour of Aluminium Alloy Sheet Under Roller Hemming Process
,” Mater. Res. Innov.
,
19
(sup10
), pp. S10-299
–S10-304
.10.1179/1432891715Z.000000000217554.
Hu
,
X.
,
Lin
,
Z. Q.
,
Li
,
S. H.
, and
Zhao
,
Y. X.
, 2010
, “
Fracture Limit Prediction for Roller Hemming of Aluminum Alloy Sheet
,” Mater. Des.
,
31
(3
), pp. 1410
–1416
.10.1016/j.matdes.2009.08.03955.
Das
,
I. M.
,
Saxena
,
K. K.
, and
Mukhopadhyay
,
J.
, 2016
, “
Determination of Bending Limit Curves for Aluminium Alloy AA6014-T4: An Experimental Approach
,” TMS 2016 145th Annual Meeting & Exhibition
,
Springer International Publishing
,
Cham, Switzerland
, pp. 541
–547
.10.1007/978-3-319-48254-5_6556.
Khodayari
,
G.
, 2008
, “
Bending Limit Curve for Rotary Draw Bending of Tubular Components in Automotive Hydroforming Applications
,” SAE Int. J. Mater. Manuf.
,
1
(1
), pp. 841
–848
.10.4271/2008-01-276257.
Wang
,
C.-T.
,
Kinzel
,
G.
, and
Altan
,
T.
, 1995
, “
Failure and Wrinkling Criteria and Mathematical Modeling of Shrink and Stretch Flanging Operations in Sheet-Metal Forming
,” J. Mater. Process. Technol.
,
53
(3–4
), pp. 759
–780
.10.1016/0924-0136(94)01766-T58.
Wang
,
C.-T.
,
Kinzel
,
G.
, and
Altan
,
T.
, 1994
, “
Wrinkling Criterion for an Anisotropic Shell With Compound Curvatures in Sheet Forming
,” Int. J. Mech. Sci.
,
36
(10
), pp. 945
–960
.10.1016/0020-7403(94)90056-659.
Wang
,
C.-T.
,
Kinzel
,
G. L.
, and
Altan
,
T.
, 1993
, “
Process Simulation and Springback Control in Plane Strain Sheet Bending
,” SAE
Paper No. 930280.10.4271/93028060.
Saxena
,
K. K.
,
Das
,
I. M.
, and
Mukhopadhyay
,
J.
, 2017
, “
Evaluation of Bending Limit Curves of Aluminium Alloy AA6014-T4 and Dual Phase Steel DP600 at Ambient Temperature
,” Int. J. Mater. Form.
,
10
(2
), pp. 221
–231
.10.1007/s12289-015-1271-661.
Panich
,
S.
, 2017
, “
Bending Limit Curves in Sheet Metal Bending Evaluation
,” Key Eng. Mater.
,
751
, pp. 180
–185
.10.4028/www.scientific.net/KEM.751.18062.
Thuillier
,
S.
, May 2014
, “
Influence of a Tensile Pre-Strain on Bending of Aluminium Alloy
,” Key Eng. Mater.
,
611–612
, pp. 1742
–1749
.10.4028/www.scientific.net/KEM.611-612.174263.
Zubeil
,
M.
,
Roll
,
K.
, and
Merklein
,
M.
, 2012
, “
Extension of a Failure Criterion for Hemming Applications in the FEM Simulation
,” Key Eng. Mater.
,
504–506
, pp. 765
–770
.10.4028/www.scientific.net/KEM.504-506.76564.
Lange
,
C.
, 2004
, “Experimental and Numerical Simulation of the Hemming Process of an Aluminum Sheet,” AIP Publishing
, France, pp. 1001
–1006
.10.1063/1.176665865.
Sert
,
A.
,
Gürgen
,
S.
,
Çelik
,
O. N.
, and
Kuşhan
,
M. C.
, 2017
, “
Effect of Heat Treatment on the Bending Behavior of Aluminum Alloy Tubes
,” J. Mech. Sci. Technol.
,
31
(11
), pp. 5273
–5278
.10.1007/s12206-017-1020-566.
Swillo
,
S. J.
,
Iyer
,
K.
, and
Hu
,
S. J.
, 2006
, “
Angled Line Method for Measuring Continuously Distributed Strain in Sheet Bending
,” ASME J. Manuf. Sci. Eng.
,
128
(3
), pp. 651
–658
.10.1115/1.219354467.
Swillo
,
S.
,
Kocanda
,
A.
,
Czyzewski
,
P.
, and
Kowalczyk
,
P.
, 2011
, “
Hemming Process Evaluation by Using Computer Aided Measurement System and Numerical Analysis
,” 10th International Conference on Technology of Plasticity
, Aachen, Germany, Sept. 25–30, pp. 633
–637
.https://www.researchgate.net/publication/228805525_Hemming_Process_Evaluation_by_Using_Computer_Aided_Measurement_System_and_Numerical_Analysis68.
Swillo
,
S.
, 2013
, “
Experimental Apparatus for Sheet Metal Hemming Analysis
,” Comput. Methods Mater. Sci.
,
13
(2
), pp. 326
–332
.https://www.infona.pl/resource/bwmeta1.element.baztech-bca76081-bb65-4819-9971-edc7cd18cd5b/tab/summary69.
Dewang
,
Y.
, and
Sharma
,
V.
, 2020
, “
A Study on Sheet Metal Hemming Process
,” Mater. Today Proc.
,
27
, pp. 2091
–2095
.10.1016/j.matpr.2019.09.07470.
Davies
,
G.
, 2003
, Materials for Automobile Bodies
,
Butterworth-Heinemann
,
Boston, MA
.71.
Muderrisoglu
,
A.
,
Murata
,
M.
,
Ahmetoglu
,
M. A.
,
Kinzel
,
G.
, and
Altan
,
T.
, May 1996
, “
Bending, Flanging, and Hemming of Aluminum Sheet—An Experimental Study
,” J. Mater. Process. Technol.
,
59
(1–2
), pp. 10
–17
.10.1016/0924-0136(96)02281-972.
Livatyali
,
H.
,
Müderrisoğlu
,
A.
,
Ahmetoğlu
,
M. A.
,
Akgerman
,
N.
,
Kinzel
,
G. L.
, and
Altan
,
T.
, 2000
, “
Improvement of Hem Quality by Optimizing Flanging and Pre-Hemming Operations Using Computer Aided Die Design
,” J. Mater. Process. Technol.
,
98
(1
), pp. 41
–52
.10.1016/S0924-0136(99)00304-073.
Golovashchenko
,
S. F.
, 2005
, “
Sharp Flanging and Flat Hemming of Aluminum Exterior Body Panels
,” J. Mater. Eng. Perform.
,
14
(4
), pp. 508
–515
.10.1361/105994905X5614274.
Lin
,
G.
,
Li
,
J.
,
Hu
,
S. J.
, and
Cai
,
W.
, 2007
, “
A Computational Response Surface Study of Three-Dimensional Aluminum Hemming Using Solid-to-Shell Mapping
,” ASME J. Manuf. Sci. Eng.
,
129
(2
), pp. 360
–368
.10.1115/1.251543075.
Shang
,
J.
,
Wilkerson
,
L.
, and
Hatkevich
,
S.
, 2011
, “
Hemming of Aluminum Alloy Sheets Using Electromagnetic Forming
,” J. Mater. Eng. Perform.
,
20
(8
), pp. 1370
–1377
.10.1007/s11665-011-9988-y76.
Hamedon
,
Z.
,
Mori
,
K.
, and
Abe
,
Y.
, 2014
, “
Hemming for Joining High Strength Steel Sheets
,” Procedia Eng.
,
81
, pp. 2074
–2079
.10.1016/j.proeng.2014.10.28877.
Abe
,
Y.
,
Mori
,
K.
, and
Nakagawa
,
K.
, 2017
, “
Assembly of Ultra-High Strength Steel Hollow Part by Hemming Using Pre-Bent Inner Sheet
,” Procedia Eng.
,
207
, pp. 974
–979
.10.1016/j.proeng.2017.10.86178.
Lu
,
H.
,
Zhang
,
J.
,
Tian
,
N.
,
Song
,
X.
,
Ma
,
M.
, and
Lu
,
G.
, 2018
, “
Recycle-Friendly Aluminum Alloy Sheets for Automotive Applications Based on Hemming
,” Autom. Innov.
,
1
(1
), pp. 70
–75
.10.1007/s42154-018-0012-179.
Babalo
,
V.
,
Soltanpour
,
M.
, and
Fazli
,
A.
, 2019
, “
High Speed Circular Hemming; a Novel Joining Process for Thin and Low-Ductile Sheets
,” Thin-Walled Struct.
,
142
, pp. 98
–115
.10.1016/j.tws.2019.04.05980.
Wessel
,
A.
,
Butz
,
A.
,
Willmann
,
T.
, and
Bischoff
,
M.
, 2020
, “
Effect of Different Anisotropic 3D Yield Functions on a Roller Hemming Simulation
,” Procedia Manuf.
,
47
, pp. 1358
–1365
.10.1016/j.promfg.2020.04.26481.
Davidkov
,
A.
,
Petrov
,
R. H.
,
De Smet
,
P.
,
Schepers
,
B.
, and
Kestens
,
L. A. I.
, 2011
, “
Microstructure Controlled Bending Response in AA6016 Al Alloys
,” Mater. Sci. Eng. A
,
528
(22–23
), pp. 7068
–7076
.10.1016/j.msea.2011.05.05582.
Thuillier
,
S.
,
Maoût
,
N. L.
, and
Manach
,
P. Y.
, 2011
, “
Influence of Ductile Damage on the Bending Behaviour of Aluminium Alloy Thin Sheets
,” Mater. Des.
,
32
(4
), pp. 2049
–2057
.10.1016/j.matdes.2010.11.05083.
Davidkov
,
A.
,
Petrov
,
R. H.
,
Bliznuk
,
V.
,
Ratchev
,
P.
,
De Smet
,
P.
,
Schepers
,
B.
, and
Kestens
,
L.
, 2011
, “
Microstructure and Hemming Properties of AA6016 Aluminum Alloy Sheets
,” Key Eng. Mater.
,
465
, pp. 451
–454
.10.4028/www.scientific.net/KEM.465.45184.
Gu
,
Z.
,
Wang
,
G.
, and
Yu
,
G.
, 2020
, “
Investigation on Fracture of a 6014-T4 Aluminum Alloy Sheet in the Flanging and Hemming Process Based on Numerical and Experimental Methods
,” Metals
,
10
(1
), p. 81
.10.3390/met1001008185.
Martinsen
,
F. A.
,
Ehlers
,
F. J. H.
,
Torsæter
,
M.
, and
Holmestad
,
R.
, 2012
, “
Reversal of the Negative Natural Aging Effect in Al–Mg–Si Alloys
,” Acta Mater.
,
60
(17
), pp. 6091
–6101
.10.1016/j.actamat.2012.07.04786.
Wang
,
Q.
,
Dong
,
X.
,
Li
,
H.
, and
Zhang
,
H.
, 2011
, “
Analytical Model for Straight Hemming Based on Minimum Energy Method
,” J. Zhejiang Univ. Sci. A
,
12
(7
), pp. 532
–542
.10.1631/jzus.A100045887.
Liewald
,
M.
,
Hönle
,
S.
, and
Sindel
,
M.
, 2016
, “
Surface Roughening of an Aluminum 6016 Alloy During Bending and Hemming
,” Int. J. Mater. Form
,
9
(2
), pp. 203
–213
.10.1007/s12289-015-1223-188.
Kaiser
,
C.
,
Roll
,
K.
, and
Volk
,
W.
, 2017
, “
Increasing the Efficiency of Designing Hemming Processes by Using an Element-Based Metamodel Approach
,” J. Phys. Conf. Ser.
,
896
, p. 012041
.10.1088/1742-6596/896/1/01204189.
Lin
,
J. G.
,
Wang
,
E. W.
, and
Zhou
,
G. R.
, 2014
, “
Hemming Process Simulation of Table-Top Hemming Machine
,” Appl. Mech. Mater.
,
644–650
, pp. 2177
–2180
.10.4028/www.scientific.net/AMM.644-650.217790.
Zhang
,
G.
,
Wu
,
X.
, and
Hu
,
S. J.
, 2001
, “
A Study on Fundamental Mechanisms of Warp and Recoil in Hemming
,” J. Eng. Mater. Technol.
,
123
(4
), pp. 436
–441
.10.1115/1.139634891.
Yun
,
S. Z.
,
Liu
,
Y.
,
Jian
,
Y. S.
,
Yang
,
P. C.
, and
Bing
,
W. A.
, 2011
, “
Warp Phenomenon Analysis in Hemming Process of Autobody Panel
,” Appl. Mech. Mater.
,
66–68
, pp. 545
–550
.10.4028/www.scientific.net/AMM.66-68.54592.
Lin
,
G.
,
Iyer
,
K.
,
Hu
,
S. J.
,
Cai
,
W.
, and
Marin
,
S. P.
, 2005
, “
A Computational Design-of-Experiments Study of Hemming Processes for Automotive Aluminium Alloys
,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf.
,
219
(10
), pp. 711
–722
.10.1243/095440505X3266193.
Wang
,
G.
,
Gu
,
Z.
,
Xu
,
H.
, and
Yu
,
G.
, 2020
, “
Numerical Analysis and Experimental Investigation of Surface Defects in Die Hemming Process
,” Int. J. Mater. Form.
,
13
(1
), pp. 91
–102
.10.1007/s12289-019-01470-x94.
The Aluminum Association
, 1998
, Automotive Aluminum Crash Energy Management Manual
,
The Aluminum Association, Publication AT5
, Arlington County, VA.95.
Hamedon
,
Z.
,
Mori
,
K. I.
, and
Abe
,
Y.
, 2015
, “
Fatigue Strength of High Strength Steel Sheets Joined by Hemming Process
,” Appl. Mech. Mater.
,
773–774
, pp. 282
–286
.10.4028/www.scientific.net/AMM.773-774.28296.
Wanintradul
,
C.
,
Golovashchenko
,
S. F.
,
Gillard
,
A. J.
, and
Smith
,
L. M.
, 2014
, “
Hemming Process With Counteraction Force to Prevent Creepage
,” J. Manuf. Process.
,
16
(3
), pp. 379
–390
.10.1016/j.jmapro.2014.04.00397.
Bagheri
,
F.
,
Madoliat
,
R.
,
Sedighi
,
M.
, and
Asgari
,
A.
, 2019
, “
Rubber-Assisted Pre-Hemming Process: A Parametric Study
,” J. Manuf. Process.
,
38
, pp. 328
–337
.10.1016/j.jmapro.2019.01.03198.
Sun
,
Y. D.
, and
Wu
,
H. H.
, 2012
, “
A Study on the Dimension of Vehicle Closure Hemming Components
,” Adv. Mater. Res.
,
482–484
, pp. 895
–899
.10.4028/www.scientific.net/AMR.482-484.89599.
Sofuoğlu
,
M. A.
,
Gürgen
,
S.
,
Çakır
,
F. H.
, and
Orak
,
S.
, 2017
, “
Springback Behavior of AA6082T6 Tubes in Three-Point Bending Operation
,” Procedia Eng.
,
182
, pp. 658
–664
.10.1016/j.proeng.2017.03.176100.
Maoût
,
N. L.
,
Thuillier
,
S.
, and
Manach
,
P. Y.
, 2010
, “
Drawing, Flanging and Hemming of Metallic Thin Sheets: A Multi-Step Process
,” Mater. Des.
,
31
(6
), pp. 2725
–2736
.10.1016/j.matdes.2010.01.030101.
Thuillier
,
S.
,
Maoût
,
N. L.
,
Manach
,
P. Y.
, and
Debois
,
D.
, 2008
, “
Numerical Simulation of the Roll Hemming Process
,” J. Mater. Process. Technol.
,
198
(1–3
), pp. 226
–233
.10.1016/j.jmatprotec.2007.07.004102.
Manach
,
P. Y.
,
Maoût
,
N. L.
, and
Thuillier
,
S.
, 2010
, “
A Multi-Step Assembly Process: Drawing, Flanging and Hemming of Metallic Sheets
,” EPJ Web Conf.
,
6
, p. 08004
.10.1051/epjconf/20100608004103.
Maoût
,
N. L.
,
Manach
,
P. Y.
, and
Thuillier
,
S.
, 2012
, “
Influence of Prestrain on the Numerical Simulation of the Roller Hemming Process
,” J. Mater. Process. Technol.
,
212
(2
), pp. 450
–457
.10.1016/j.jmatprotec.2011.10.008104.
Jeong
,
C.
,
Oya
,
T.
, and
Yanagimoto
,
J.
, 2013
, “
Analysis of Fracture Behavior and Stress–Strain Distribution of Martensite/Austenite Multilayered Metallic Sheet
,” J. Mater. Process. Technol.
,
213
(4
), pp. 614
–620
.10.1016/j.jmatprotec.2012.10.017105.
Oya
,
T.
,
Tiesler
,
N.
,
Kawanishi
,
S.
,
Yanagimoto
,
J.
, and
Koseki
,
T.
, 2010
, “
Experimental and Numerical Analysis of Multilayered Steel Sheets Upon Bending
,” J. Mater. Process. Technol.
,
210
(14
), pp. 1926
–1933
.10.1016/j.jmatprotec.2010.07.003106.
Liewald
,
M.
,
Hofmann
,
D.
, and
Hönle
,
S.
, 2016
, Hemming of Layered Composites Dedicated to Stiffness Increase
,
Verlag Meisenbach GmbH
, Stuttgart, Germany.107.
Carsley
,
J.
, and
Kim
,
S.
, 2007
, “
Warm Hemming of Magnesium Sheet
,” J. Mater. Eng. Perform.
,
16
(3
), pp. 331
–338
.10.1007/s11665-007-9053-z108.
Levinson
,
A.
,
Mishra
,
R. K.
,
Doherty
,
R. D.
, and
Kalidindi
,
S. R.
, 2012
, “
Microstructure Evolution During Roller Hemming of AZ31B Magnesium Sheet
,” Metall. Mater. Trans. A
,
43
(10
), pp. 3824
–3833
.10.1007/s11661-012-1184-7109.
Xie
,
H.
,
Liu
,
K.
,
Wang
,
Q.
,
Peng
,
F.
,
Fang
,
L.
,
Dong
,
X.
, and
Wang
,
J.
, 2016
, “
Experimental Exploration of Electrical Pulse-Assisted Roller Hemming of AZ31B Magnesium Alloy Sheet
,” J. Shanghai Jiaotong Univ. Sci.
,
21
(5
), pp. 557
–561
.10.1007/s12204-016-1762-8110.
Kleeh
,
T.
,
Merklein
,
M.
, and
Roll
,
K.
, 2011
, “
Modeling Laser Heating for Roller Hemming Applications
,” Key Eng. Mater.
,
473
, pp. 501
–508
.10.4028/www.scientific.net/KEM.473.501111.
Kleeh
,
T.
,
Merklein
,
M.
, and
Roll
,
K.
, 2012
, “
Laser Heat Treatment Effects on Roller Hemming in Aluminum Alloys
,” Key Eng. Mater.
,
504–506
, pp. 711
–716
.10.4028/www.scientific.net/KEM.504-506.711112.
Woizeschke
,
P.
,
Heinrich
,
L.
, and
Eichner
,
P.
, 2018
, “
Laser Edge Forming to Increase the Bending Radius in Hemming
,” MATEC Web Conf.
,
190
, p. 02002
.10.1051/matecconf/201819002002113.
Jimbert
,
P.
,
Eguia
,
I.
,
Perez
,
I.
,
Gutierrez
,
M. A.
, and
Hurtado
,
I.
, May 2011
, “
Analysis and Comparative Study of Factors affecting quality in the Hemming of 6016T4AA Performed by Means of Electromagnetic Forming and Process Characterization
,” J. Mater. Process. Technol.
,
211
(5
), pp. 916
–924
.10.1016/j.jmatprotec.2010.08.022114.
Anderson
,
R.
, Brännström, P., Daehn, S., Eguia, I., and Gonzalez, B., 2008
, “
Flanging and Hemming of Auto Body Panels Using the Electro Magnetic Forming Technology
,” The Third International Conference on High Speed Forming
,
Dortmund, Germany
, Mar. 11–12, pp. 163
–172
.10.17877/DE290R-14136115.
Rajak
,
A.
, and
Kore
,
S.
, 2017
, “
Electromagnetic Hemming of Aluminum Sheets Using FEM
,” Advances in Intelligent Systems Research
, Vol.
137
, Raigad, India, Dec. 26–27, pp. 77
–82
.https://www.atlantis-press.com/article/25871594.pdfCopyright © 2022 by ASME
You do not currently have access to this content.
