A simplified numerical procedure to predict springback in a 2D draw bend test was developed based on the hybrid method which superposes bending effects onto membrane solutions. In particular, the procedure was applied for springback analysis of a specially designed draw bend test with directly controllable restraining forces. As a semi-analytical method, the new approach was especially useful to analyze the effects of various process and material parameters on springback. The model can accommodate general anisotropic yield functions along with nonlinear isotropic-kinematic hardening under the plane strain condition. For sensitivity analysis, process effects such as the amount of bending curvature, normalized back force and friction, as well as material property effects such as hardening behavior including the Bauschinger effect and yield surface shapes were studied. Also, for validation purposes, the new procedure was applied for the springback analysis of the dual-phase high strength steel and results were compared with experiments.
Issue Section:
Technical Papers
1.
Gardiner
, F. J.
, 1957, “The Springback of Metals
,” Trans. ASME
0097-6822, 79
(1
), pp. 1
–9
.2.
Queener
, C. A.
, and De Angelis
, R. J.
, 1968, “Elastic Springback and Residual Stresses in Sheet Formed by Bending
,” Trans. Inst. Electron., Inf. Commun. Eng. D-II
0915-1923, 61
, pp. 757
–768
.3.
Baba
, A.
, 1964, “Effect of Tensile Force in Stretch-Forming Process on the Springback
,” Bull. JSME
0021-3764, 7
, pp. 834
–843
.4.
Wang
, C.
, Kinzel
, G.
, and Altan
, T.
, 1993, “Mathematical Modeling of Plane-Strain Bending of Sheet and Plate
,” J. Mater. Process. Technol.
0924-0136, 39
, pp. 279
–304
.5.
Chan
, K. C.
, and Wang
, S. H.
, 1999, “Theoretical Analysis of Springback in Bending of Integrated Circuit Leadframes
,” J. Mater. Process. Technol.
0924-0136, 91
(13
), pp. 111
–115
.6.
Johnson
, W.
, and Yu
, T. X.
, 1981, “Springback After the Biaxial Elastic-Plastic Pure Bending of a Rectangular Plate
,” Int. J. Mech. Sci.
0020-7403, 23
(10
), pp. 619
–30
.7.
Yu
, T. X.
, and Johnson
, W.
, 1982, “Influence of Axial Force on the Elastic-Plastic Bending and Springback of a Beam
,” J. Mech. Work. Technol.
0378-3804, 6
(1
), pp. 5
–21
.8.
Sudo
, C.
, Kojima
, M.
, and Matsuoka
, T.
, 1974, “Some Investigations on Elastic Recovery of Press Formed Part
,” Proceedings of the 8th Biennial Congress of IDDRG
, p. 192
.9.
Thompson
, N. E.
, and Ellen
, C. H.
, 1985, “A Simple Theory for Side-Wall Curl
,” Journal of Applied Metalworking
, 4
(1
), pp. 39
–42
.10.
Jeunechamps
, P. P.
, Ho
, K. C.
, Lin
, J.
, Ponthot
, J. P.
, Dean
, T. A.
, 2006, “A Closed Form Technique to Predict Springback in Creep Age-Forming
,” Int. J. Mech. Sci.
0020-7403, 48
, pp. 621
–629
.11.
Kawaguchi
, T.
, Imatani
, S.
, and Yamaguchi
, K.
, 1994, “An Elasto-Viscoplastic Finite Element Analysis of Sheet Metal Bending Process
,” J. Jpn. Soc. Technol. Plast.
0038-1586, 35
, pp. 125
–130
.12.
Mattiasson
, K.
, Strange
, A.
, Thilderkvist
, P.
, and Samuelsson
, A.
, 1995, “Springback in Sheet Metal Forming
,” 5th International Conference on Numerical Methods in Industrial Forming Process
, New York, pp. 115
–124
.13.
He
, N.
, and Wagoner
, R. H.
, 1996, “Springback Simulation in Sheet Metal Forming
,” Proceedings of Numisheet’96
, edited by J. K.
Lee
, G. L.
Kinzel
, and R. H.
Wagoner
, eds., The Ohio State University, pp. 308
–315
.14.
Li
, K. P.
, Carden
, W. P.
, and Wagoner
, R. H.
, 2001, “Simulation of Springback
,” Int. J. Mech. Sci.
0020-7403, 44
(1
), pp. 103
–122
.15.
Geng
, L.
, and Wagoner
, R. H.
, 2002, “Role of Plastic Anisotropy and Its Evolution on Springback
,” Int. J. Mech. Sci.
0020-7403, 44
(1
), pp. 123
–148
.16.
Chung
, K.
, Lee
, M. G.
, Kim
, D.
, Kim
, C.
, Wenner
, M. L.
, Barlat
, F.
, 2005, “Springback Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Functions—Part I: Theory and Formulation
,” Int. J. Plast.
0749-6419, 21
(5
), pp. 861
–882
.17.
Lee
, M. G.
, Kim
, D.
, Kim
, C.
, Wagoner
, R. H.
, Wenner
, M. L.
, and Chung
, K.
, 2005, “Springback Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Functions—Part II: Characterizations of Material Properties
,” Int. J. Plast.
0749-6419, 21
(5
), pp. 883
–914
.18.
Lee
, M. G.
, Kim
, D.
, Kim
, C.
, Wenner
, M. L.
, and Chung
, K.
, 2005, “Springback Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Nonquadratic Anisotropic Yield Functions—Part III: Applications
,” Int. J. Plast.
0749-6419, 21
(5
), pp. 915
–353
.19.
Bui
, Q. V.
, Papeleux
, L.
, and Ponthot
, J. P.
, 2004, “Numerical Simulation of Springback Using Enhanced Assumed Strain Elements
,” J. Mater. Process. Technol.
0924-0136, 153–154
, pp. 314
–318
.20.
Simo
, J. C.
, and Amero
, F.
, 1992, “Geometrically Nonlinear Enhanced Strain Mixed Methods and the Method of Compatible Modes
,” Int. J. Numer. Methods Eng.
0029-5981, 33
, pp. 1413
–1449
.21.
Wenner
, M. L.
, 1983, “On the Work Hardening and Springback in Plane Strain Draw Forming
,” Journal of Applied Metalworking
, 2
(4
), pp. 342
–349
.22.
Zhang
, J. T.
, and Lee.
, D.
, 1995, “Development of New Model for Plane Strain Bending and Springback Analysis
,” J. Mater. Eng. Perform.
1059-9495, 4
, pp. 291
–300
.23.
“NUMISHEET’93 Benchmark Problem,” 1993,
Proceedings of the 2nd International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes
, A.
Makinouchi
, E.
Nakamachi
, E.
Onate
, and R. H.
Wagoner
, eds., Isehara, Japan.24.
Pouboghrat
, F.
, and Chu
, E.
, 1995, “Springback in Plane Strain Stretch∕Draw Sheet Forming
,” Int. J. Mech. Sci.
0020-7403, 36
(3
), pp. 327
–341
.25.
Pouboghrat
, F.
, Chung
, K.
, and Richmond
, O.
, 1998, “A Hybrid Membrane∕Shell Method for Rapid Estimation of Springback in Anisotropic Sheet Metals
,” ASME J. Appl. Mech.
0021-8936, 65
, pp. 671
–684
.26.
Yoon
, J. W.
, Pouboghrat
, F.
, Chung
, K.
, Yang
, D.
, 2002, “Springback Prediction for Sheet Metal Forming Process Using a 3D Hybrid Membrane∕Shell Method
,” Int. J. Mech. Sci.
0020-7403, 44
(10
), pp. 2133
–2153
.27.
Carden
, W. D.
, Geng
, L. M.
, Matlock
, D. K.
, and Wagoner
, R. H.
, 2002, “Measurement of Springback
,” Int. J. Mech. Sci.
0020-7403, 44
(1
), pp. 79
–101
.28.
Wang
, J. F.
, Wagoner
, R. H.
, Carden
, W. D.
, Matlock
, D. K.
, and Barlat
, F.
, 2004, “Creep and Anelasticity in the Springback of Aluminum
,” Int. J. Plast.
0749-6419, 20
(12
), pp. 2209
–2232
.29.
Barlat
, F.
, Brem
, J. C.
, Yoon
, J. W.
, Chung
, K.
, Dick
, R. E.
, Choi
, S. H.
, Pouboghrat
, F.
, Chu
, E.
, and Lege
, D. J.
, 2003, “Plane Stress Yield Function for Aluminum Alloy Sheets
,” Int. J. Plast.
0749-6419, 19
(9
), pp. 1297
–1319
.30.
Chaboche
, J. L.
, 1986, “Time Dependent Constitutive Theories for Cyclic Plasticity
,” Int. J. Plast.
0749-6419, 2
, pp. 149
–188
.31.
Chun
, B. K.
, Jinn
, J. T.
, and Lee
, J. K.
, 2002, “Modeling the Bauschinger Effect for Sheet Metals—Part I: Theory
,” Int. J. Plast.
0749-6419, 18
(5
), pp. 571
–595
.32.
Ohno
, N.
, and Wang
, J. D.
, 1993, “Nonlinear Hardening Rules with Critical State of Dynamics Recovery—Part 1: Formulation and Basic Features for Ratcheting Behavior
,” Int. J. Plast.
0749-6419, 9
(3
), pp. 375
–390
.33.
Ohno
, N.
, and Wang
, J. D.
, 1993, “Nonlinear Hardening Rules with Critical State of Dynamics Recovery—Part 2: Applications to Experiments of Ratcheting Behavior
,” Int. J. Plast.
0749-6419, 9
(3
), pp. 391
–403
.34.
Ohno
, N.
, and Katchi
, Y.
, 1986, “A Constitutive Model of Cyclic Plasticity for Nonlinear Hardening Materials
,” ASME J. Appl. Mech.
0021-8936, 53
(2
), pp. 395
–403
.35.
Bower
, A. F.
, 1989, “Cyclic Hardening Properties of Hard-Drawn Copper and Rail Steel
,” J. Mech. Phys. Solids
0022-5096, 37
, pp. 455
–470
.36.
Armstrong
, P. J.
, and Frederick
, C. O.
, 1966, “A Mathematical Representation of the Multiaxial Bauschinger Effect
,” G.E.G.B. Report No. RD∕B∕N 731.37.
Boger
, R. K.
, Wagoner
, R. H.
, Barlat
, F.
, Lee
, M. G.
, and Chung
, K.
, 2005, “Continuous, Large Strain, Tension∕Compression Testing of Sheet Material
,” Int. J. Plast.
0749-6419, 21
, pp. 2319
–2343
.38.
Stoughton
, T. B.
, 1988, “Model of Drawbead Forces in Sheet Metal Forming
,” Proceedings of the 15th IDDRG, Dearborn
, USA and Toronto, Canada, pp. 205
–215
.39.
Marciniak
, Z.
, and Duncan
, J.
, 1992, Mechanics of Sheet Metal Forming
, Edward Arnolds
, London, UK
.40.
Wagoner
, R. H.
, Gan
, W.
, and Kovacs
, W.
, 2005, “Characterization of Friction-Stir Welds for Tailor-Welded Blank Applications
,” First year report for GM R&D Center.41.
Lee
, W.
, Kim
, J.
, Ryou
, H.
, Kim
, D.
, Kim
, C.
, Wenner
, M. L.
, Chung
, K.
, 2006, “Numerical Sheet Forming Simulation of Friction Stir Welded TWB Automotive Sheets
,” Final Report for GM R&D Center.42.
Wang
, J. F.
, Wagoner
, R. H.
, Matlock
, D. K.
, and Barlat
, F.
, 2005, “Anticlastic Curvature in Draw-Bend Springback
,” Int. J. Solids Struct.
0020-7683, 42
(12
), pp. 1287
–1307
.Copyright © 2007
by American Society of Mechanical Engineers
You do not currently have access to this content.
