Microchannels are an integral part of various micro devices i.e. micro chemical reactors, fuel cell and electronic packaging etc. There are two important criteria for design of microchannels. The first criterion is the minimization of pressure drop across the microchannel such that the parasitic power requirement is minimized during the operation of these devices. The second criterion is the mixing enhancement due to stronger wall-normal motion of the near wall fluid particles leading to reduction in velocity, temperature and concentration gradient at the wall. Wall surface roughness can be suitably modified for achieving the above objectives in macro-scale flows. Riblets on the channel surface are effective in reducing the frictional resistance for macro flow situations. Various ribs or turbulator geometries have proved to be effective for near wall mixing in heat exchangers and gas turbine blade cooling ducts. However, no systematic study on mixing enhancement due to flow past repeated micro ribs inside microchannel is available in literature. The present study presents the detailed flow past repeated micro-ribs inside a microchannel from micro-PIV (Particle Image Velocimetry) measurements. The microchannel made of Polydimethylsiloxane (PDMS) has been fabricated by PDMS replica moulding. The channel is 50μm × 120μm cross section. The width and height of ribs are 30μm and 10μm respectively. The pitch between the multiple ribs is equal to 100μm. The presence of flow separation at the edge of the rib with generation of vortex structure is not observed at the flow rate set in the present study contrary to the macro flow situations. However, the shear layer is deflected towards the wall with increase in wall-normal velocity indicating possible effectiveness of micro ribs for mixing enhancement in the microchannels.
- Nanotechnology Institute
Micro-PIV Study of Flow Inside Micro Channel With Surface Mounted Repeated Transverse Ribs
- Views Icon Views
- Share Icon Share
- Search Site
Asfer, M, & Panigrahi, PK. "Micro-PIV Study of Flow Inside Micro Channel With Surface Mounted Repeated Transverse Ribs." Proceedings of the ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer. ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer, Parts A and B. Tainan, Taiwan. June 6–9, 2008. pp. 723-732. ASME. https://doi.org/10.1115/MNHT2008-52173
Download citation file: