Skip Nav Destination
1-4 of 4
Proc. ASME. IMECE2013, Volume 1: Advances in Aerodynamics, V001T01A001, November 15–21, 2013
Paper No: IMECE2013-62360
... and mass transfer in the system is very import to minimize the device. A mathematical model of heat and mass transfer in the evaporator, coupled with analysis of fluid flow in the loop, is developed in the paper. The model is applied to calculate the critical heat load that the vapor blanket forms...
Proc. ASME. IMECE2010, Volume 5: Energy Systems Analysis, Thermodynamics and Sustainability; NanoEngineering for Energy; Engineering to Address Climate Change, Parts A and B, 799-802, November 12–18, 2010
Paper No: IMECE2010-38769
... 01 05 2012 The characteristics of heat pump evaporator are simulated using steady-state lumped parameter model. Considering the difference between the heat transfer of vapor and liquid refrigerant, the calculating method of the weighted average temperature in evaporator is revised...
Proc. ASME. IMECE2003, Heat Transfer, Volume 4, 15-19, November 15–21, 2003
Paper No: IMECE2003-41149
... 13 05 2008 Non-uniform pressure drops and the uneven heat load can easily cause the mal-distribution of the working fluids in the parallel evaporator lines, which further leads to non-optimum thermal performance. The electrically driven flow based on the electrohydrodynamic (EHD...
Proc. ASME. IMECE2004, Heat Transfer, Volume 2, 493-500, November 13–19, 2004
Paper No: IMECE2004-59345
... conduction pumping can significantly decrease the pressure drop of the two-phase flow. It is also found that the performances of the EHD conduction pump are related to the mass flux and quality of two-phase flow. EHD conduction mal-distribution flow control evaporator Aincompressible liquid...