Thermally driven ammonia/water Kalina cycles have shown some promise for improving the efficiency of electricity production from low temperature reservoirs (T < 200°C). However, there has been limited application of these systems to exploiting widely available, disperse, waste heat streams for smaller scale power production (∼ 1 kWe). Factors limiting increased deployment of these systems include large, costly heat exchangers, and concerns over safety of the working fluid. The use of mini and microchannel (D < 1 mm) heat exchangers has the potential to decrease system size and cost, while also reducing the working fluid inventory, enabling penetration of Kalina cycles into these new markets.

To demonstrate this potential, a detailed heat exchanger model for a liquid-coupled microchannel ammonia/water condenser is developed. The heat exchanger is sized to provide the required heat transfer area for a 1 kWe Kalina system with a source and sink temperature of 150° and 20°C, respectively. An additional constraint on heat exchanger size is that the fluid pressure loss is maintained below some threshold value. A parametric analysis is conducted to assess the effect of different correlations/models for predicting the underlying heat and mass transfer and pressure drop of the ammonia/water mixture on the calculated heat exchanger area. The results show that accurately minimizing the size of the overall system is dependent upon validated zeotropic heat and mass transfer models at low mass fluxes and in small channels.

This content is only available via PDF.
You do not currently have access to this content.