Marangoni thermocapillary convection and its contribution to heat transfer during boiling has been the subject of some debate in the open literature. Currently, for certain conditions, such as microgravity boiling, is being shown that has a significant contribution to heat transfer . Typically, this phenomenon is investigated for the idealized case of an isolated and stationary bubble resting atop a heated solid which is immersed in a semi-infinite quiescent fluid or within a two-dimensional cavity. However, little information is available with regard to Marangoni heat transfer in miniature confined channels in the presence of a cross flow. As a result, this paper presents a numerical study that investigates the influence of steady thermal Marangoni convection on the fluid dynamics and heat transfer around a bubble during laminar flow of water in a minichannel with the view of developing a refined understanding of boiling heat transfer for such a configuration. This mixed convection problem is investigated for channel Reynolds numbers in the range of 0 ≤Re ≤500 and Marangoni numbers in the range of 0 ≤ Ma ≤ 17114. The influence of the thermocapillary flow is most pronounced for low Re and high Ma numbers showing an average of 40% increase in heat transfer. For low Ma and high Re inertial effects dominate and the thermocapillary effect is not as noticeable. However, the disruption of the fully developed flow does tend to enhance the heat transfer at the expense of additional pressure drop.
- Nanotechnology Institute
Numerical Study of Marangoni: Thermocapillary Convection Influence During Boiling Heat Transfer in Minichannels
- Views Icon Views
- Share Icon Share
- Search Site
Radulescu, C, & Robinson, AJ. "Numerical Study of Marangoni: Thermocapillary Convection Influence During Boiling Heat Transfer in Minichannels." Proceedings of the ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. Darmstadt, Germany. June 23–25, 2008. pp. 627-634. ASME. https://doi.org/10.1115/ICNMM2008-62244
Download citation file: