MILD coal combustion is one of promising technologies for clean coal utilization due to uniform heat flux and low NOx emission, while the effect of turbulent mixing on single coal particle combustion under high temperature and low oxygen concentration remains to be studied for micron level particles. In this paper, a 1-D transient coal combustion model was applied to describe mass and heat transfer around a single particle, and the effect of forced convection was modeled to represent turbulent mixing according to similarity analysis. Based on that, effect of particle Reynolds number (Rep) on single coal particle combustion was investigated at various temperature (Ta), oxygen concentration (xO2) and particle diameter (d0). As Rep increases, ignition time (ti) decreases quickly at first and then decreases slowly. ti of larger particle is more sensitive to Rep. As Rep increases, flame temperature (Tf) for 40 μm coal particle decreases, while Tf for 80 μm coal particle barely changes, and that for 160 μm coal particle increases a little. The recommended d0 for MILD coal combustion is smaller than 80 μm. As xO2 decreases from 21% to 5%, ti apparently increases and Tf decreases. ti at lower Ta is more sensitive to Rep. Tf decreases with increasing Rep when Ta < 1200 K. But it appears the opposite trend at Ta = 1600 K. The recommended Ta for MILD coal combustion is lower than 1400 K, while it cannot be too low considering the burnout of char particle.