Skip Nav Destination
1-10 of 10
Keywords: large eddy simulationClose
Proc. ASME. GT2020, Volume 7B: Heat Transfer, V07BT12A016, September 21–25, 2020
Paper No: GT2020-14439
...LARGE EDDY SIMULATION OF THE 7-7-7 SHAPED FILM COOLING HOLE AT AXIAL AND COMPOUND ANGLE ORIENTATIONS Kevin Tracy1, Stephen P. Lynch2 1Pratt & Whitney, East Hartford, CT 2Penn State University, University Park, PA ABSTRACT Shaped film cooling holes are used extensively for film cooling in gas...
Proc. ASME. GT2020, Volume 7B: Heat Transfer, V07BT12A019, September 21–25, 2020
Paper No: GT2020-14525
... of cooling hole surface roughness in a laidback fan-shaped hole on the flow structure and film-cooling effectiveness. The three-dimensional compressible LES approach (large eddy simulation) is conducted in a baseline 7-7-7 laidback fan-shaped hole. The cooling hole is located on a flat plate surface...
Proc. ASME. GT2020, Volume 7B: Heat Transfer, V07BT12A062, September 21–25, 2020
Paper No: GT2020-15830
...Abstract Abstract Large eddy simulations on well-known 7-7-7 fan shaped cooling hole have been carried out. Film cooling methods are generally applied to high pressure turbine, of which flow condition is extremely turbulent because high pressure turbines are generally located downstream...
Proc. ASME. GT2020, Volume 2C: Turbomachinery, V02CT35A023, September 21–25, 2020
Paper No: GT2020-14809
...Abstract Abstract The turbulent flow in a compressor cascade is calculated by using a new simulation method, i.e., parameter extension simulation (PES). It is defined as the calculation of a turbulent flow with the help of a reference solution. A special large-eddy simulation (LES) method...
Proc. ASME. GT2020, Volume 2C: Turbomachinery, V02CT35A011, September 21–25, 2020
Paper No: GT2020-14554
...Abstract Abstract Large Eddy Simulation (LES) has already been widely applied for unsteady flow simulations (e.g., axial cascade simulation), showing its superiority in the case of turbulent flow fields. However, there are several obstacles in the practical use of LES as a cascade design tool...
Proc. ASME. GT2020, Volume 2A: Turbomachinery, V02AT32A045, September 21–25, 2020
Paper No: GT2020-15180
...Vortex Structures Analysis and Loss Mechanisms in Axial Compressor Cascade with and without Bleeding Slot Using Large Eddy Simulation Yun Gong, Shaowen Chen, Haipeng Zheng, Songtao Wang School of Energy Science and Engineering Harbin Institute of Technology Harbin, Heilongjiang, China Fax: +86-0451...
Proc. ASME. GT2010, Volume 4: Heat Transfer, Parts A and B, 213-222, June 14–18, 2010
Paper No: GT2010-22572
... ratio (H/d) (1 to 8), and jet Reynolds number (12878 to 25750) are varied. Computations are carried out by using large eddy simulation (LES) with Smagorinsky-Lilly sub grid scale modeling. Excellent agreement is obtained between the computational and the experimental data. The computationally obtained...
Proc. ASME. GT2009, Volume 2: Combustion, Fuels and Emissions, 951-968, June 8–12, 2009
Paper No: GT2009-60230
... 23 02 2010 An unconfined strongly swirled flow is investigated for different Reynolds numbers using particle image velocimetry (PIV) and Large Eddy Simulation (LES) with a Thickened Flame (TF) model. Both reacting and non-reacting flow results are presented. In the LES-TF approach...
Proc. ASME. GT2008, Volume 3: Combustion, Fuels and Emissions, Parts A and B, 1021-1034, June 9–13, 2008
Paper No: GT2008-51320
... 04 08 2009 A Thickened Flame (TF) modeling approach is combined with a Large Eddy Simulation (LES) methodology to model premixed combustion and the accuracy of these model predictions is evaluated by comparing with the piloted premixed stoichiometric methane-air flame data of Chen et...
Proc. ASME. GT2005, Volume 2: Turbo Expo 2005, 721-728, June 6–9, 2005
Paper No: GT2005-69010
... 03 11 2008 The present paper describes a study that is aimed at establishing and quantifying the benefits of the Large Eddy Simulation (LES) method for predicting scalar turbulent transport in a combustor relevant jet-mixing problem. A non-reacting co-annular jet mixing configuration...