Impacts of foreign objects can cause cracks and dents in airfoils, especially in the leading edge. The regeneration of high-pressure compressors blisks with current repair methods is often restricted to a local blending of these edges. This can cause significant changes in the airfoils’ geometrical properties, which in turn influence their aerodynamic and aeroelastic characteristics. Changes at the leading edge have a particularly strong influence on the airfoils’ aerodynamic properties. In order to be able to make an informed decision about if and how a repair should be performed, consequences have to be predicted in advance.

To investigate their influence on the aerodynamic and aeroelastic behavior, typical blend repairs are applied to the geometry of a blisk in a 1.5-stage research axial compressor [1], which are representative in shape and size. Blisks (Blade-Integrated-diSK) are function integrated components, which are expected to have a high life span due to significant costs in design and production. Similar modifications are implemented at different radial heights of the blades, in order to investigate the influence of location and penetration depth of blend repairs. It is assured that only the blend repair region is modified while the rest of the blade stays in the original shape. Thus, a realistic change of the geometry is given.

The numerical study presented here deals with the influence of geometric imperfections, blend repairs in particular, on the aerodynamic and aeroelastic behavior of the high pressure compressors blisks. Results show that blend repairs have an influence on the local pressure distribution as well as on the local flow turning. Even though the leading edge is reshaped during repair, performance degradation can be observed. Furthermore, the working range of the compressor stage is influenced by the blend-repairs, which is of great importance for safe operation. Finally, the local changes in aerodynamics and blade deformation influence the aeroelastic behavior. This influence depends on the investigated mode shape and the location of the modification. The closer the modification is located towards the tip, the more pronounced are the shifts in aerodynamic damping and aerodynamic stiffness. Low torsional mode shapes display the highest sensitivity to the modifications.

This content is only available via PDF.
You do not currently have access to this content.