In the combustor inlet diffuser section of gas turbine engine, high-velocity air from compressor flows into the diffuser, where a considerable portion of the inlet velocity head PT3 − PS3 is converted to static pressure (PS) before the airflow enters the combustor. Modern high through-flow turbine engine compressors are highly loaded and usually have high inlet Mach numbers. With high compressor exit Mach numbers, the velocity head at the compressor exit station may be as high as 10% of the total pressure. The function of the diffuser is to recover a large proportion of this energy. Otherwise, the resulting higher total pressure loss would result in a significantly higher level of engine specific fuel consumption. The diffuser performance must also be sensitive to inlet velocity profiles and geometrical variations of the combustor relative to the location of the pre-diffuser exit flow path. Low diffuser pressure losses with high Mach numbers are more rapidly achieved with increasing length. However, diffuser length must be short to minimize engine length and weight. A good diffuser design should have a well considered balance between the confliction requirements for low pressure losses and short engine lengths. The present paper describes the effect of divergence angle on diffuser performance for gas turbine combustion chamber using Computational Fluid Dynamic Approach. The flow through the diffuser is numerically solved for divergence angles ranging from 5 to 25°. The flow separation and formation of wake regions are studied.
- Fluids Engineering Division
Effect of Divergence Angle on Flow Through Inlet Section of Diffuser of a Gas Turbine Combustion Chamber: The CFD Approach
- Views Icon Views
- Share Icon Share
- Search Site
Kulshreshtha, DB, Channiwala, SA, Chaudhary, J, Lakdawala, Z, Solanki, H, & Dikshit, S. "Effect of Divergence Angle on Flow Through Inlet Section of Diffuser of a Gas Turbine Combustion Chamber: The CFD Approach." Proceedings of the ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering. Volume 1: Symposia, Parts A and B. Miami, Florida, USA. July 17–20, 2006. pp. 185-192. ASME. https://doi.org/10.1115/FEDSM2006-98062
Download citation file: