Research Papers

Design and Development of a Dual-Axis Force Sensing MEMS Microgripper

[+] Author and Article Information
Sijie Yang

Department of Electromechanical Engineering,
Faculty of Science and Technology,
University of Macau,
Avenida da Universidade,
Taipa, Macau, China
e-mail: mb55447@umac.mo

Qingsong Xu

Department of Electromechanical Engineering,
Faculty of Science and Technology,
University of Macau,
Avenida da Universidade,
Taipa, Macau, China
e-mail: qsxu@umac.mo

Zhijie Nan

Department of Electromechanical Engineering,
Faculty of Science and Technology,
University of Macau,
Avenida da Universidade,
Taipa, Macau, China
e-mail: mb65517@umac.mo

1Corresponding author.

Manuscript received April 10, 2017; final manuscript received September 14, 2017; published online October 9, 2017. Assoc. Editor: Larry L Howell.

J. Mechanisms Robotics 9(6), 061011 (Oct 09, 2017) (9 pages) Paper No: JMR-17-1098; doi: 10.1115/1.4038010 History: Received April 10, 2017; Revised September 14, 2017

This paper presents the design, simulation, fabrication, and testing processes of a new microelectromechanical systems (MEMS) microgripper, which integrates an electrostatic actuator and a capacitive force sensor. One advantage of the presented gripper is that the gripping force and interaction force in two orthogonal directions can be, respectively, detected by a single force sensor. The whole gripper structure consists of the left actuating part and right sensing part. It owns a simple structure and compact footprint. The actuator and sensor are fixed and linearly guided by four leaf flexures, respectively. The left arm of the gripper is driven through a lever amplification mechanism. By this structure, the displacement from the electrostatic actuator is transmitted and enlarged at the gripper tip. The right arm of the gripper is designed to detect the gripping and interaction forces using a capacitive sensor. The MEMS gripper is manufactured by SOIMUMPs process. The performance of the designed gripper is verified by conducting finite element analysis (FEA) simulation and experimental studies. Moreover, the demonstration of biocellulose gripping confirms the feasibility of the developed gripper device.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Chowdhury, S. , Thakur, A. , Wang, C. , Svec, P. , Losert, W. , and Gupta, S. K. , 2014, “ Automated Manipulation of Biological Cells Using Gripper Formations Controlled by Optical Tweezers,” IEEE Trans. Autom. Sci. Eng., 11(2), pp. 338–347. [CrossRef]
Dechev, N. , Cleghorn, W. L. , and Mills, J. K. , 2004, “ Microassembly of 3-D Microstructures Using a Compliant, Passive Microgripper,” J. Microelectromech. Syst., 13(2), pp. 176–189. [CrossRef]
Ansel, Y. , Schmitz, F. , Kunz, S. , Gruber, H. P. , and Popovic, G. , 2002, “ Development of Tools for Handling and Assembling Microcomponents,” J. Micromech. Microeng., 12(4), pp. 430–437. [CrossRef]
Howell, L. , 2001, Compliant Mechanisms, Wiley, New York.
Zhang, R. , Chu, J. , Wang, H. , and Chen, Z. , 2013, “ A Multipurpose Electrothermal Microgripper for Biological Micro-Manipulation,” Microsyst. Technol., 19(1), pp. 89–97. [CrossRef]
Xu, Q. , 2013, “ Adaptive Discrete-Time Sliding Mode Impedance Control of a Piezoelectric Microgripper,” IEEE Trans. Rob., 29(3), pp. 663–673. [CrossRef]
AbuZaiter, A. , Nafea, M. , and Ali, M. S. M. , 2016, “ Development of a Shape-Memory-Alloy Micromanipulator Based on Integrated Bimorph Microactuators,” Mechatronics, 38, pp. 16–28. [CrossRef]
Piriyanont, B. , and Moheimani, S. O. R. , 2014, “ MEMS Rotary Microgripper With Integrated Electrothermal Force Sensor,” J. Microelectromech. Syst., 23(6), pp. 1249–1251. [CrossRef]
Kim, D. H. , Lee, M. G. , Kim, B. , and Sun, Y. , 2005, “ A Superelastic Alloy Microgripper With Embedded Electromagnetic Actuators and Piezoelectric Force Sensors: A Numerical and Experimental Study,” Smart Mater. Struct., 14(6), pp. 1265–1272. [CrossRef]
Yang, S. , and Xu, Q. , 2016, “ Design of a Microelectromechanical Systems Microgripper With Integrated Electrothermal Actuator and Force Sensor,” Int. J. Adv. Robot. Syst., 13(5), p. 172988141666337.
Molhave, K. , and Hansen, O. , 2005, “ Electro-Thermally Actuated Microgrippers With Integrated Force-Feedback,” J. Micromech. Microeng., 15(6), pp. 1265–1270. [CrossRef]
Khan, F. , Bazaz, S. A. , and Sohail, M. , 2010, “ Design, Implementation and Testing of Electrostatic SOIMUMPs Based Microgripper,” Microsyst. Technol., 16(11), pp. 1957–1965. [CrossRef]
Xu, Q. , 2015, “ Design, Fabrication, and Testing of an MEMS Microgripper With Dual-Axis Force Sensor,” IEEE Sens. J., 15(10), pp. 6017–6026. [CrossRef]
Solano, B. , and Wood, D. , 2007, “ Design and Testing of a Polymeric Microgripper for Cell Manipulation,” Microelectro. Eng., 84(5), pp. 1219–1222. [CrossRef]
Chronis, N. , and Lee, L. P. , 2005, “ Electrothermally Activated SU-8 Microgripper for Single Cell Manipulation in Solution,” J. Microelectromech. Syst., 14(4), pp. 857–863. [CrossRef]
Estevez, P. , Bank, J. M. , Porta, M. , Wei, J. , Sarro, P. M. , Tichem, M. , and Staufer, U. , 2012, “ 6 DOF Force and Torque Sensor for Micro-Manipulation Applications,” Sens. Actuators A, 186, pp. 86–93. [CrossRef]
Kim, K. , Liu, X. , Zhang, Y. , and Sun, Y. , 2008, “ Nanonewton Force-Controlled Manipulation of Biological Cells Using a Monolithic MEMS Microgripper With Two-Axis Force Feedback,” J. Micromech. Microeng., 18(5), p. 055013. [CrossRef]
Wei, J. , Porta, M. , Tichem, M. , and Sarro, P. M. , 2009, “ A Contact Position Detection and Interaction Force Monitoring Sensor for Micro-Assembly Applications,” 15th International Conference on Solid-State Sensors, Actuators Microsystems (TRANSDUCERS), Denver, CO, June 21–25, pp. 2385–2388.
Beyeler, F. , Neild, A. , Oberti, S. , Bell, D. J. , Sun, Y. , Dual, J. , and Nelson, B. J. , 2007, “ Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field,” J. Microelectromech. Syst., 16(1), pp. 7–15. [CrossRef]
Krijnen, B. , and Brouwer, D. M. , 2014, “ Flexures for Large Stroke Electrostatic Actuation in MEMS,” J. Micromech. Microeng., 24(1), p. 015006. [CrossRef]
Grade, J. D. , Jerman, H. , and Kenny, T. W. , 2003, “ Design of Large Deflection Electrostatic Actuators,” J. Microelectromech. Syst., 12(3), pp. 335–343. [CrossRef]
Ravi Sankar, A. , Das, S. , and Lahiri, S. K. , 2009, “ Cross-Axis Sensitivity Reduction of a Silicon MEMS Piezoresistive Accelerometer,” Microsyst. Technol., 15(4), pp. 511–518. [CrossRef]
Qu, J. , Zhang, W. , Jung, A. , Sliva, S. , and Liu, X. , 2015, “ A MEMS Microgripper With Two-Axis Actuators and Force Sensors for Microscale Mechanical Characterization of Soft Materials,” IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, Sweden, Aug. 24–28, pp. 1620–1625.


Grahic Jump Location
Fig. 1

Schematic diagram of the MEMS microgripper

Grahic Jump Location
Fig. 2

Fundamental principle of lateral type of electrostatic comb-teeth actuator

Grahic Jump Location
Fig. 3

Schematic diagram of capacitive sensor with read-out circuit

Grahic Jump Location
Fig. 4

Simulation result of the gripper with 150 μN applied at the actuating end of the movable plate

Grahic Jump Location
Fig. 5

Simulation result of cross-axis sensitivity of the force sensor for gripping (Fd) and interaction (Fc) force sensing

Grahic Jump Location
Fig. 6

FEA simulation results of modal analysis: (a) first resonant mode and (b) second resonant mode

Grahic Jump Location
Fig. 7

SOI fabrication process of the microgripper

Grahic Jump Location
Fig. 8

(a) Fabricated gripper prototype with microscope images of gripper parts including, (b) electrostatic actuator connected with folded leaf flexure, (c) gripper tips, and (d) capacitive sensor

Grahic Jump Location
Fig. 9

Experimental setup for gripping force sensing testing

Grahic Jump Location
Fig. 10

Gripping force calibration result

Grahic Jump Location
Fig. 11

Experimental setup for interaction force sensing testing

Grahic Jump Location
Fig. 12

Interaction force calibration result

Grahic Jump Location
Fig. 13

Relationship between input voltage and gripping displacement

Grahic Jump Location
Fig. 14

Experimental result of relationship between gripping force and driving voltage for grasping a biocellulose material

Grahic Jump Location
Fig. 15

Snapshots of grasping a biocellulose material of 96 μm diameter: (a) initial state, (b) grasping, (c) grasped, and (d) released




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In