Research Papers

The Synthesis of Function Generating Mechanisms for Periodic Curves Using Large Numbers of Double-Crank Linkages

[+] Author and Article Information
Hessein Ali

Department of Mechanical and
Aerospace Engineering,
University of Dayton,
Dayton, OH 45469
e-mail: ashourh1@udayton.edu

Andrew P. Murray, David H. Myszka

Department of Mechanical and
Aerospace Engineering,
University of Dayton,
Dayton, OH 45469

1Corresponding author.

Manuscript received March 21, 2016; final manuscript received January 22, 2017; published online March 20, 2017. Assoc. Editor: Philippe Wenger.

J. Mechanisms Robotics 9(3), 031002 (Mar 20, 2017) (8 pages) Paper No: JMR-16-1077; doi: 10.1115/1.4035985 History: Received March 21, 2016; Revised January 22, 2017

This paper presents a methodology for synthesizing planar linkages to approximate any prescribed periodic function. The mechanisms selected for this task are the slider-crank and the geared five-bar with connecting rod and sliding output (GFBS), where any number of double-crank (or drag-link) four-bars are used as drivers. A slider-crank mechanism, when comparing the input crank rotation to the output slider displacement, produces a sinusoid-like function. Instead of directly driving the input crank, a drag-link four-bar may be added to drive the crank from its output via a rigid connection between the two. Driving the input of the added four-bar results in a function that modifies the sinusoid-like curve. This process can be continued through the addition of more drag-link mechanisms to the device, progressively altering the curve toward any periodic function with a single maximum. For periodic functions with multiple maxima, a GFBS is used as the terminal linkage added to the chain of drag-link mechanisms. The synthesis process starts by analyzing one period of the function to design either the terminal slider-crank or terminal GFBS. matlab's fmincon command is then utilized as the four-bars are added to reduce the structural error between the desired function and the input–output function of the mechanism. Mechanisms have been synthesized in this fashion to include a large number of links that are capable of closely producing functions with a variety of intriguing features.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Erdman, A. , Sandor, G. , and Kota, S. , 2001, Mechanism Design: Analysis and Synthesis, 4th ed., Prentice Hall, Upper Saddle River, NJ.
Norton, R. L. , 2012, Design of Machinery, 5th ed., McGraw Hill, New York.
McCarthy, J. M. and Soh, G. S. , 2011, Geometric Design of Linkages (Interdisciplinary Applied Mathematics), 2nd ed., Springer, New York.
Waldron, K. J. , and Kinzel, G. L. , 2004, Kinematics, Dynamics, and Design of Machinery, 2nd ed., Wiley, Hoboken, NJ.
Almandeel, A. , Murray, A. P. , Myszka, D. H. , and Stumph, H. E., III , 2015, “ A Function Generation Synthesis Methodology for All Defect-Free Slider-Crank Solutions for Four Precision Points,” ASME J. Mech. Rob., 7(3), p. 031020. [CrossRef]
Freudenstein, F. , 1954, “ An Analytical Approach to the Design of Four-Link Mechanisms,” Trans. ASME, 76, pp. 483–492.
Erdman, A. , Sandor, G. , and Kota, S. , 1984, Advanced Mechanism Design: Analysis and Synthesis, Vol. 2, Prentice Hall, Englewood Cliffs, NJ.
Freudenstein, F. , 1959, “ Structural Error Analysis in Plane Kinematic Synthesis,” J. Eng. Ind., 81(1), pp. 15–22.
Naik, D. , and Amarnath, C. , 1989, “ Synthesis of Adjustable Four Bar Function Generators Through Five Bar Loop Closure Equations,” Mech. Mach. Theory, 24(6), pp. 523–526. [CrossRef]
McGovern, J. F. , and Sandor, G. N. , 1973, “ Kinematic Synthesis of Adjustable Mechanisms—Part 1: Function Generation,” ASME J. Manuf. Sci. Eng., 95(2), pp. 417–422.
Soong, R.-C. , and Chang, S.-B. , 2011, “ Synthesis of Function-Generation Mechanisms Using Variable Length Driving Links,” Mech. Mach. Theory, 46(11), pp. 1696–1706. [CrossRef]
Subbian, T. , and Flugrad, D. , 1994, “ Six and Seven Position Triad Synthesis Using Continuation Methods,” ASME J. Mech. Des., 116(2), pp. 660–665. [CrossRef]
McLarnan, C. , 1963, “ Synthesis of Six-Link Plane Mechanisms by Numerical Analysis,” ASME J. Manuf. Sci. Eng., 85(1), pp. 5–10.
Dhingra, A. K. , Cheng, J. C. , and Kohli, D. , 1994, “ Synthesis of Six-Link, Slider-Crank and Four-Link Mechanisms for Function, Path and Motion Generation Using Homotopy and m-Homogenization,” ASME J. Mech. Des., 116(4), pp. 1122–1131. [CrossRef]
Dhingra, A. K. , and Mani, N. K. , 1993, “ Finitely and Multiply Separated Synthesis of Link and Geared Mechanisms Using Symbolic Computing,” ASME J. Mech. Des., 115(3), pp. 560–567. [CrossRef]
Al-Dwairi, A. F. , 2009, “ Design of Centric Drag-Link Mechanisms for Delay Generation With Focus on Space Occupation,” ASME J. Mech. Des., 131(1), p. 011015. [CrossRef]
Oleksa, S. A. , and Tesar, D. , 1971, “ Multiply Separated Position Design of the Geared Five-Bar Function Generator,” ASME J. Manuf. Sci. Eng., 93(1), pp. 74–84.
Erdman, A. G. , and Sandor, G. N. , 1971, “ Kinematic Synthesis of a Geared Five-Bar Function Generator,” ASME J. Manuf. Sci. Eng., 93(1), pp. 11–16.
Sultan, I. , and Kalim, A. , 2011, “ On the Kinematics and Synthesis of a Geared Five-Bar Slider-Crank Mechanism,” Proc. Inst. Mech. Eng. C, 225(5), pp. 1253–1261. [CrossRef]
Freudenstein, F. , and Primrose, E. , 1963, “ Geared Five-Bar Motion—Part I: Gear Ratio Minus One,” ASME J. Appl. Mech., 30(2), pp. 161–169. [CrossRef]
Primrose, E. , and Freudenstein, F. , 1963, “ Geared Five-Bar Motion—Part 2: Arbitrary Commensurate Gear Ratio,” ASME J. Appl. Mech., 30(2), pp. 170–175. [CrossRef]
Artobolevskii, I. I. , 1964, Mechanisms for the Generation of Plane Curves, Macmillan, New York.
Lui, Y. , and McCarthy, J. M. , 2016, “ Design of Mechanisms to Trace Plane Curves,” ASME Paper No. DETC2016-59689.
Sutherland, G. , and Roth, B. , 1975, “ An Improved Least-Squares Method for Designing Function-Generating Mechanisms,” ASME J. Manuf. Sci. Eng., 97(1), pp. 303–307.
Chen, F. , and Chan, V.-L. , 1974, “ Dimensional Synthesis of Mechanisms for Function Generation Using Marquardt's Compromise,” ASME J. Manuf. Sci. Eng., 96(1), pp. 131–137.
Sarganachari, S. G. , Math, V. B. , and Ali, S. A. , 2010, “ Synthesis of Planar Six-Bar Mechanism for Function Generation: A Variable Topology Approach,” Int. J. Appl. Eng. Res., 5(3), pp. 471–476.
Shariati, M. , and Norouzi, M. , 2011, “ Optimal Synthesis of Function Generator of Four-Bar Linkages Based on Distribution of Precision Points,” Meccanica, 46(5), pp. 1007–1021. [CrossRef]
Akcali, I. , and Dittrich, G. , 1989, “ Function Generation by Galerkin's Method,” Mach. Mech. Theory, 24(1), pp. 39–43. [CrossRef]
Ting, K.-L. , 1994, “ Mobility Criteria of Geared Five-Bar Linkages,” Mech. Mach. Theory, 29(2), pp. 251–264. [CrossRef]
Murray, A. P. , and Larochelle, P. , 1998, “ A Classification Scheme for Planar 4R, Spherical 4R, and Spatial RCCC Linkages to Facilitate Computer Animation,” ASME Paper No. DETC98/MECH-5887.


Grahic Jump Location
Fig. 1

The vector loop of the offset slider-crank mechanism

Grahic Jump Location
Fig. 2

The vector loop of the geared five-bar mechanism with a connecting rod and a sliding output

Grahic Jump Location
Fig. 3

The vector loop of the drag-link mechanism

Grahic Jump Location
Fig. 6

The desired function, the slider-crank output, and the curve generated using the proposed method resulting in the addition of nine drag-link mechanisms

Grahic Jump Location
Fig. 7

A slider-crank driven by nine drag-link mechanisms to produce the desired function shown in Fig. 6

Grahic Jump Location
Fig. 8

The desired function and the input–output functions generated for several GFBS cases

Grahic Jump Location
Fig. 9

The desired function having four maxima using a gear ratio of −4:1

Grahic Jump Location
Fig. 10

The desired function having four maxima using a gear ratio of −5:1. The arrow emphasizes the additional extreme due to the selected gear ratio.

Grahic Jump Location
Fig. 11

(a) The desired piecewise-linear periodic function using the terminal slider-crank. (b) The desired piecewise-linear periodic function using the terminal GFBS. (c) A periodic function with two maxima. (d) Ten maxima periodic function.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In