Research Papers

Kinematic Analysis and Dimensional Synthesis of Exechon Parallel Kinematic Machine for Large Volume Machining

[+] Author and Article Information
Y. Jin

School of Mechanical & Aerospace Engineering,
Queen's University Belfast,
Belfast BT9 5AH, UK
e-mail: y.jin@qub.ac.uk

Z. M. Bi

Department of Engineering,
Indiana University Purdue University,
Fort Wayne, IN 46805
e-mail: biz@ipfw.edu

H. T. Liu

School of Mechanical Engineering,
Tianjin University,
Tianjin 300072, China
e-mail: liuhaitao_tju@126.com

C. Higgins

Northern Ireland Technology Centre,
Queen's University Belfast,
Belfast BT9 5AH, UK
e-mail: c.j.higgins@qub.ac.uk

M. Price

School of Mechanical & Aerospace Engineering,
Queen's University Belfast,
Belfast BT9 5AH, UK
e-mail: m.price@qub.ac.uk

W. H. Chen

School of Automation Science
and Electrical Engineering,
Beihang University,
Beijing 100191, China
e-mail: whchen@buaa.edu.cn

T. Huang

School of Mechanical Engineering,
Tianjin University,
Tianjin 300072, China
e-mail: tianhuang@tju.edu.cn

1Corresponding author.

Contributed by the Mechanisms and Robotics Committee of ASME for publication in the JOURNAL OF MECHANISMS AND ROBOTICS. Manuscript received August 5, 2013; final manuscript received December 18, 2014; published online March 11, 2015. Assoc. Editor: Xianmin Zhang.

J. Mechanisms Robotics 7(4), 041004 (Nov 01, 2015) (8 pages) Paper No: JMR-13-1150; doi: 10.1115/1.4029499 History: Received August 05, 2013; Revised December 18, 2014; Online March 11, 2015

A parallel kinematic machine (PKM) topology can only give its best performance when its geometrical parameters are optimized. In this paper, dimensional synthesis of a newly developed PKM is presented for the first time. An optimization method is developed with the objective to maximize both workspace volume and global dexterity of the PKM. Results show that the method can effectively identify design parameter changes under different weighted objectives. The PKM with optimized dimensions has a large workspace to footprint ratio and a large well-conditioned workspace, hence justifies its suitability for large volume machining.

Copyright © 2015 by ASME
Your Session has timed out. Please sign back in to continue.


Summers, M., 2005, “Robot Capability Test and Development of Industrial Robot Positioning System for the Aerospace Industry,” SAE Aerospace Manufacturing and Automated Fastening Conference, Paper No. 2005-01-3336. [CrossRef]
Weck, M., and Staimer, D., 2002, “Parallel Kinematic Machine Tools—Current State and Future Potentials,” CIRP Ann.—Manuf. Technol., 51(2), pp. 671–683. [CrossRef]
Rehsteiner, F., Neugebauer, R., Spiewak, S., and Wieland, F., 1999, “Putting Parallel Kinematics Machines (PKM) to Productive Work,” CIRP Ann.—Manuf. Technol., 48(1), pp. 345–350. [CrossRef]
Neumann, K., 1988, “Robot,” U.S. patent US4732525.
Tonshoff, H. K, and Grendel, H., 1999, “A Systematic Comparison of Parallel Kinematics,” Parallel Kinematic Machines, Springer, London, pp. 295–312.
Neumann, K., 2006, “The Key to Aerospace Automation,” SAE Aerospace Manufacturing and Automated Fastening Conference and Exhibition, Paper No. 2006-01-3144. [CrossRef]
Bi, Z., and Jin, Y., 2011, “Kinematic Modeling of Exechon Parallel Kinematic Machine,” Rob. Comput. Integr. Manuf., 27(1), pp. 186–193. [CrossRef]
Eastwood, S., 2004, “Error Mapping and Analysis for Hybrid Parallel Kinematic Machines,” Ph.D. thesis, University of Nottingham, Nottingham, UK.
Liu, H., Huang, T., Zhao, X., Mei, J., and Chetwynd, D., 2007, “Optimal Design of the Trivariant Robot to Achieve a Nearly Axial Symmetry of Kinematic Performance,” Mech. Mach. Theory, 42(12), pp. 1643–1652. [CrossRef]
McToal, P., Jin, Y., Higgins, C., and Brooks, H., 2010, “ALCAS Wing Box Root End Machining Solution—A Parallel Kinematic Approach,” SAE 2010 Aerospace Manufacturing and Automated Fastening Conference and Exhibition, Wichita, KS, Sept. 28–30, Paper No. 10AMAF-0125.
Jin, Y., Bi, Z., Gibson, R., McToal, P., Morgan, M., McClory, C., and Higgins, C., 2011, “Kinematic Analysis of a New Over-Constrained Parallel Kinematic Machine,” 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, June 19–25, pp. A7–282.
Gosselin, C., and Angeles, J., 1991, “A Global Performance Index for the Kinematic Optimization of Robotic Manipulators,” ASME J. Mech. Des., 113(3), pp. 220–226. [CrossRef]
Monsarrat, B., and Gosselin, C., 2003, “Workspace Analysis and Optimal Design of a 3-Leg 6-DOF Parallel Platform Mechanism,” IEEE Trans. Rob. Autom., 19(6), pp. 954–966. [CrossRef]
Castelli, G., Ottaviano, E., and Ceccarelli, M., 2008, “A Fairly General Algorithm to Evaluate Workspace Characteristics of Serial and Parallel Manipulators,” Mech. Des. Struct. Mach., 36(1), pp. 14–33. [CrossRef]
Jin, Y., Chen, I., and Yang, G., 2006, “Kinematic Design of a 6-DOF Parallel Manipulator With Decoupled Translation and Rotation,” IEEE Trans. Rob., 22(3), pp. 545–551. [CrossRef]
Carbone, G., Ottaviano, E., and Ceccarelli, M., 2007, “An Optimum Design Procedure for Both Serial and Parallel Manipulators,” Proc. Inst. Mech. Eng., Part C, 221(7), pp. 829–843. [CrossRef]
Lou, Y., Liu, G., and Li, Z., 2008, “Randomized Optimal Design of Parallel Manipulators,” IEEE Trans. Autom. Sci. Eng., 5(2), pp. 223–233. [CrossRef]
Liu, X., 2006, “Optimal Kinematic Design of a Three Translational DOFs Parallel Manipulator,” Robotica, 24(2), pp. 239–250. [CrossRef]
Liu, X., and Wang, J., 2007, “A New Methodology for Optimal Kinematic Design of Parallel Mechanisms,” Mech. Mach. Theory, 42(9), pp. 1210–1224. [CrossRef]
Merlet, J., 2006, “Jacobian, Manipulability, Condition Number, and Accuracy of Parallel Robots,” ASME J. Mech. Des., 128(1), pp. 199–206. [CrossRef]
Cardou, P., Bouchard, S., and Gosselin, C., 2010, “Kinematic-Sensitivity Indices for Dimensionally Nonhomogeneous Jacobian Matrices,” IEEE Trans. Rob., 26(1), pp. 166–173. [CrossRef]
Liu, X., and Gao, F., 2000, “Optimum Design of 3-DOF Spherical Parallel Manipulators With Respect to the Conditioning and Stiffness Indices,” Mech. Mach. Theory, 35(9), pp. 1257–1267. [CrossRef]
Chablat, D., and Wenger, P., 2003, “Architecture Optimization of a 3-DOF Translational Parallel Mechanism for Machining Applications, the Orthoglide,” IEEE Trans. Rob. Autom., 19(3), pp. 403–410. [CrossRef]
Huang, T., Li, M., Zhao, X., Mei, J., Whitehouse, D., and Hu, S., 2005, “Conceptual Design and Dimensional Synthesis for a 3-DOF Module of the Trivariant—A Novel 5-DOF Reconfigurable Hybrid Robot,” IEEE Trans. Rob. Autom., 21(3), pp. 449–456. [CrossRef]
Li, Y., and Xu, Q., 2006, “A New Approach to the Architecture Optimization of a General 3-PUU Translational Parallel Manipulator,” J. Intell. Rob. Syst., 46(1), pp. 59–72. [CrossRef]
Pierrot, F., Nabat, V., Krut, S., and Poignet, P., 2009, “Optimal Design of a 4-DOF Parallel Manipulator: From Academia to Industry,” IEEE Trans. Rob., 25(2), pp. 213–224. [CrossRef]
Liu, H., Huang, T., Mei, J., Zhao, X., Chetwynd, D., Li, M., and Hu, S., 2007, “Kinematic Design of a 5-DOF Hybrid Robot With Large Workspace/Limb-Stroke Ratio,” ASME J. Mech. Des., 129(5), pp. 530–537. [CrossRef]
Ottaviano, E., and Ceccarelli, M., 2002, “Optimal Design of Capaman (Cassino Parallel Manipulator) With a Specified Orientation Workspace,” Robotica, 20(2), pp. 159–166. [CrossRef]
Jiang, Q., and Gosselin, C., 2009, “Geometric Optimization of the MSSM Gough-Stewart Platform,” ASME J. Mech. Rob., 1(3), p. 031006. [CrossRef]
Jiang, Q., and Gosselin, C., 2010, “Geometric Synthesis of Planar 3-RPR Parallel Mechanisms for Singularity-Free Workspace,” Trans. CSME, 33(4), pp. 667–678, available at: http://tcsme.org/Papers/Vol33/Vol33No4Paper11.pdf
Altuzarra, O., Pinto, C., Sandru, B., and Hernandez, A., 2011, “Optimal Dimensioning for Parallel Manipulators: Workspace, Dexterity, and Energy,” ASME J. Mech. Des., 133(4), p. 041007. [CrossRef]
Wang, J., Wu, C., and Liu, X., 2010, “Performance Evaluation of Parallel Manipulators: Motion/Force Transmissibility and Its Index,” Mech. Mach. Theory, 45(10), pp. 1462–1476. [CrossRef]
Zoppi, M., Zlatanov, D., and Molfino, R., 2010, “Kinematic Analysis of the Exechon Tripod,” ASME Paper No. DETC2010-28668. [CrossRef]
Zlatanov, D., Zoppi, M., and Molfino, R., 2012, “Constraint and Singularity Analysis of the Exechon Tripod,” ASME Paper No. DETC2012-71184. [CrossRef]
Tandirci, M., Angeles, J., and Ranjbaran, F., 1992, “The Characteristic Point and the Characteristic Length of Robotic Manipulators,” ASME 22nd Biennial Conference on Robotics, Spatial Mechanisms, and Mechanical Systems, Scottsdale, AZ, Sept. 13–16, pp. 203–208.
Stocco, L., Sacudean, S., and Sassani, F., 1999, “On the Use of Scaling Matrices for Task-Specific Robot Design,” IEEE Trans. Rob. Autom., 15(5), pp. 958–965. [CrossRef]
Liu, H., Huang, T., and Chetwynd, D., 2011, “A Method to Formulate a Dimensionally Homogeneous Jacobian of Parallel Manipulators,” IEEE Trans. Rob., 27(1), pp. 150–156. [CrossRef]
Huang, T., Liu, H., and Chetwynd, D., 2011, “Generalized Jacobian Analysis of Lower Mobility Manipulators,” Mech. Mach. Theory, 46(6), pp. 831–844. [CrossRef]
Rao, S., 1996, Engineering Optimization: Theory and Practice, 3rd ed., Wiley, New York.


Grahic Jump Location
Fig. 2

Schematic diagram of Exechon-PKM

Grahic Jump Location
Fig. 1

Physical model of a 5DOF hybrid Exechon machine in QUB

Grahic Jump Location
Fig. 4

Reachable workspace of the three legs

Grahic Jump Location
Fig. 5

Optimization procedure of Exechon-PKM

Grahic Jump Location
Fig. 6

Optimization results of Exechon-PKM

Grahic Jump Location
Fig. 7

Workspace of the Exechon-PKM

Grahic Jump Location
Fig. 8

Conditioning distribution of workspace. (a) z = 0.85, (b) z = 0.9, (c) z = 0.95, (d) z = 1.0, (e) z = 1.05, and (f) z = 1.1.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In